OzVMX Forum
Marque Remarks => Suzuki => Topic started by: oldfart on December 30, 2010, 12:37:20 pm
-
Bit rough around the edges but she has plenty of potential 8) It's rm 250 1977 which will end up being my pre 78 ride.
As you can see it's missing a air box so if anyone can put me onto one it would be much appreciated . Vintage Suzuki have reproductions but have been advise I need mounting hardware along with a cage .
Not too sure if it has correct tank as filler is centre and i thought they where a tad off centre ( to RHS )
(http://i72.photobucket.com/albums/i180/mutchoo/002-1.jpg)
-
A tank Stu.
-
The A had the centre hole in tank from memory ,but the rest looks like a B .
The engine on the B is much better I reckon.
-
The filter cage and mounting plate etc is still available NOS and I will have a look for an airbox.
-
He knows that agent 27....it's just he's a tightarse plumber......he wants someone to cough it all up for $15..... ;D
-
Thanks 27 ...I know I can buy the filter assembly NOS but it's the air box bits that elude me .
Crocka shit, I'm penny less after you fleeced me the other day ;)
-
As he drove away in his brand new ute!!
-
was the photo taken from the roof top of your house.
-
Thanks for the tip DC- I will adjust the price accordingly!!!!
-
David , almost ;D taken from rear deck. And just for you a ground level shot ;D
Pulled the barrel of and it's had a fresh rebore .05 of which still has hone marks.
It's pulled a head stud at and blown a head gasket which probably saved it's life
it appears a low hour motor with unmolested case screws :)
(http://i72.photobucket.com/albums/i180/mutchoo/003-1.jpg)
-
split the cases today and discovered a chipped teeth and badly worn dogs .. all is not lost Oldie should have something lying around that will fit.
Problem being is I have too much. ::)
Ah here we go a Rm 250 T gear set drops straight in and using the B shift forks & drum it works a treat .... Primary drive has same amount of teeth .
(http://i72.photobucket.com/albums/i180/mutchoo/003-2.jpg)
(http://i72.photobucket.com/albums/i180/mutchoo/002-2.jpg)
-
Stripped the frame down and found a bit of rust under foot peg RHs , rest of frame was pretty solid
Drilled a series of 1/8 holes until I found solid metal .
(http://i72.photobucket.com/albums/i180/mutchoo/Rm250bRhsrailrepair001.jpg)
(http://i72.photobucket.com/albums/i180/mutchoo/Rm250bRhsrailrepair002.jpg)
-
GREAT WORK STU SHOULD TURN OUT GREAT
-
thanks old fart, now l can see it, what a good find.