OzVMX Forum
Marque Remarks => Yamaha => Topic started by: Rossvickicampbell on December 26, 2010, 06:58:47 pm
-
Gents - I have had to get the tank on my 360B fixed recently by one "Mr Nice Guy" Geoff (and f--k he has done a good job)!) Morris - coz the guy previous had tried to bog over a weep in the tank and over a period of time the bog started to lift.
Anyway - it is now time to get the tank finished - I have photos of what the tank was like prior to the repair but I have actaully seen a couple of versions of the "european" decals on this tank. Below is what I had but now want to make sure it is done correctly for the Australian version. I haven't been able to find any original documentation re this version - anyone have any pictures that could help me out - or is this the correct one?
(http://img.villagephotos.com/p/2007-6/1264741/YZ360B2.jpg)
ta
Rossco
-
I have an original tank for mine, untouched, the red at the front is actually two peices because they cant bend a decal around the corner. I'm getting 1/2 a dozen tanks painted in January so if you want it done give me a call...I have the best decal guy in Australia aswell. You can ph me on 0412747729.
-
Ross ,have a look on MX WORKS BIKE site for reference
(http://i54.tinypic.com/jt9zs2.jpg)
(http://i54.tinypic.com/2j14xnt.jpg)
(http://i51.tinypic.com/2n9b5dz.jpg)
The correct yamaha lettering should have thin L/H legs on the A's and M,and R/H side of Y
Cheers KB(http://i53.tinypic.com/fuc6lw.jpg)
-
Davy - thanks but I have access to a guy over this way who is absolutely brilliant with the airbrush. KB - ta - have had a look and can see what you mean. I may write to Terry and see if I can get a close up but some of those photos maybe close enough already.
Thanks for the advice gents.
cheers
Rossco