OzVMX Forum
Marque Remarks => Yamaha => Topic started by: BONEHEAD on August 04, 2007, 08:17:28 pm
-
HI GUYS , just wondering if anyone could identify this rear hub part number 248-25311-00 its in good nick and its been around the shed for a while.CHEERS BONEHEAD ;D ;D
-
A hub for AT1,AT2, CT1,DT125B,DT175B
-
y pic tells me is off a ct1
-
Has it got the cush drive bits? If so, do you want to sell it? I had a spare but traded it and now have a use for another...
-
yes it still has the sprocket bolted on the hub and so i beleive the cush is still there i will have a look soon , are you going to the crawford river classic i will be taking it there if not do you want to swap it for a twin leading fornt brake for a yz g/h modle.CHEERS ;D ;D
-
Yeah, I'll be at CRC... Better get my entry in!
See you there. :)
-
nathan do you think you will possibly swap the hub for a twin leading front brake assembly for the yz 250 g /h ,i will see you there and we can talk , i also have a twin leading front brakie for horizontal fork lug i wish to off load as well, look for me race # 153, cheer bonehead ;D ;D ;)
-
No, none of the TLS, angled lug backing plates spare. I'm in the same boat that I think you're in - went and bought a horizintal lug one and then discovered that it doesn't work.... I got lucky and was helped out by an exceptionally smart, good looking and fast fellow racer (they call him Noel) for my 250G, but no spares.
-
i found one on ebay just after i bought the horizontal , i was very lucky , i know if you put 250 j or k (i think)front forks there is no porblem, i also had a set of tripple trees of a h which are 43mm and two sets of forks so i converted it and the difference in braking and suspension is great, i will be bringing the horizontal lug brake if anyone is interested as well . cheers