OzVMX Forum

Clubroom => Tech Talk => Topic started by: firko on December 14, 2010, 10:42:48 pm

Title: Can-Am fork/front wheel ID.
Post by: firko on December 14, 2010, 10:42:48 pm
About a year ago I bought the below front end off Marks Swapmeet. It was sold to me as a Betor Can-Am front end....no other information. The forks are most definitely Mexican Betors and the conical hub looks like a TNT/MX2 style conical item, probably off an enduro model as it has a speedo drive, the backing plate is marked Bombardier. What throws me is the steel rim. I once owned a TNT175 and I recall it having alloy rims, am I mistaken? Is this a TNT front end? If so can anybody identify the model please?

I would like to use these on my pre 65 project but the rulebook states specifically states "late type Ceriani and Betor (Can-Am) are not permitted". Are these the "late type" forks mentioned? The sliders don't appear to be any longer than my legal period Betor and Cerianis.  (http://img.villagephotos.com/p/2005-8/1062154/BLASTING_053.jpg)(http://img.villagephotos.com/p/2005-8/1062154/15495659-20667-large.jpg)
Title: Re: Can-Am fork/front wheel ID.
Post by: holeshot buddy on December 14, 2010, 10:47:52 pm
definatly can am firko looks tnt
not sure about the rim
wheres jc he will know
Title: Re: Can-Am fork/front wheel ID.
Post by: Canam370 on December 14, 2010, 10:55:34 pm
The wheel and forks are TnT. Steel rim sees it 74-76. Ally rims started on the 75 MX2 and didn't get going until later 76/77 on TnT's These would be 'earlier' forks. Later Betors were longer travel, no guard lugs and had a reinforcing rib front and back of the slider.
Title: Re: Can-Am fork/front wheel ID.
Post by: jimg1au on December 15, 2010, 06:35:21 am
they are ok mark.its the longer sliders that are the ones not leagle.if you want i think i have some std betor sliders you could swap out for your ones i am useing 2 sets on my pre78 and pre 75 flattrackers
the front wheel def not pre 65
jim
Title: Re: Can-Am fork/front wheel ID.
Post by: JC on December 15, 2010, 09:18:02 am
The wheel and forks are TnT. Steel rim sees it 74-76. Ally rims started on the 75 MX2 and didn't get going until later 76/77 on TnT's These would be 'earlier' forks. Later Betors were longer travel, no guard lugs and had a reinforcing rib front and back of the slider.

IMHO Paul's nailed it precisely - as I would have expected. (He's our resident Canam expert) The sliders for the later longer travel Canam forks w the reinforcing ribs are considerably longer (about 2").
Title: Re: Can-Am fork/front wheel ID.
Post by: firko on December 15, 2010, 09:59:46 pm
Thanks Gentlemen.....I knew I would get a definitive answer from the brains trust. I can now stick 'em on my pre 65 and not have to worry about the rule nazis nailing me. I'm not sure the clamps are legal for pre 65 though. I advised Jason from this forum that the twin pinch bolt triple clamps might not be kosher for his upcoming pre 65 Metisse and Dave Tanner backed my opinion. I'd love someone to convince me that I was wrong and that they're OK for pre 65 ;D