OzVMX Forum
Marketplace => Wanted => Topic started by: cyclegod on December 08, 2010, 05:51:22 pm
-
Yeah, I know it's a tough ask but until someone slips a good pipe to Mr GMC to duplicate it's all I can do.
-
CG might be able to supply for copy,have both l,& rh chain drive IT 175's,will check models later ::), :P
-
CG might be able to supply for copy,have both l,& rh chain drive IT 175's,will check models later ::), :P
3R6 is what your looking for (left side EXH port) early and later models are all center port
-
ok
-
CG, I've got a decent (not great) G/H pipe. IIRC the header has been repaired, but the rest is sweet.
$50 if its as good as I recall, less if it is worse than I recall.
Can take pics if you want.
-
CG, I've got a decent (not great) G/H pipe. IIRC the header has been repaired, but the rest is sweet.
$50 if its as good as I recall, less if it is worse than I recall.
Can take pics if you want.
Yes please, pics are always helpful
-
heres a little to choose from if all else fails..
http://motors.shop.ebay.com/Motorcycle-Parts-/10063/i.html?_nkw=yamaha%20it&_catref=1&_dmpt=Motorcycles_Parts_Accessories&_fln=1&_ssov=1&_trksid=p4506.c0.m282&Part%2520Type=Exhaust
-
Yeah, I know it's a tough ask but until someone slips a good pipe to Mr GMC to duplicate it's all I can do.
Unfortunately I need bike to build a pipe to,
It’s rare to be able to build from a chamber and get the fit right.
I can usually jig for a muffler from an existing muffler, which is what I did for the 79 F model IT 175.
Interest in Vinduro stuff seems to be getting stronger of late.
-
Yeah, I know it's a tough ask but until someone slips a good pipe to Mr GMC to duplicate it's all I can do.
Unfortunately I need bike to build a pipe to,
It’s rare to be able to build from a chamber and get the fit right.
I can usually jig for a muffler from an existing muffler, which is what I did for the 79 F model IT 175.
Interest in Vinduro stuff seems to be getting stronger of late.
It may pay to ask if anyone on the Yamaha IT forum can spare a bike with its pipe and muffler for you to duplicate, from what I have seen there would be a reasonable demand both here and overseas for those particular items
-
Yes, I should do but I never got around to joining the IT forum, mostly because I don't own a Yamaha.
Last time I tried to lurk it was locked down again ???
-
Yes, I should do but I never got around to joining the IT forum, mostly because I don't own a Yamaha.
Last time I tried to lurk it was locked down again ???
I just put up a "please lend Geoff your IT175G/H thread" on there, I should do one here too.
-
I've got a good pipe and bike to suit but I'm in QLD :( :( :( :(
ANT
-
I've got a good pipe and bike to suit but I'm in QLD :( :( :( :(
ANT
D'Oh!!!!
-
Still looking for a pipe, "Go ahead, make my Christmas" ;D ;D 8)
-
If the Ebay master can't find one on ebay,what hope have we got?
I have been looking though ;D
-
There was a IT175 on ebay last week with a DG exhaust on it, I emailed the seller asking where he got it from and he said that it was on the bike when he got it.
So they must be out there some where.
ANT
-
Still looking for a pipe, "Go ahead, make my Christmas" ;D ;D 8)
Still looking for a pipe, would a 1980 YZ125 pipe be too peaky?
-
How similar is your 175 to the IT 125 G?
-
How similar is your 175 to the IT 125 G?
Totally different
-
CG check your PM...quick!
-
I have a H model pipe on my 175G and they are the same in my opinon
ANT
-
With a bit of luck I may have something good soon...... ;D
http://www.bikepics.com/pictures/2133323/