OzVMX Forum

Marque Remarks => Yamaha => Topic started by: mainline on November 05, 2010, 07:47:53 pm

Title: id my bits?
Post by: mainline on November 05, 2010, 07:47:53 pm

picked these up with some other stuff that was supposed to be yz125f, these definately aren't

I think the pipe is 125G?
(http://i300.photobucket.com/albums/nn38/mainline_bucket/whatpipe2.jpg)
(http://i300.photobucket.com/albums/nn38/mainline_bucket/whatpipe1.jpg)

The tank is about the same size as the 125f, but more rounded at the front. I thought it might be 125E, but it's stamped 3/79?
(http://i300.photobucket.com/albums/nn38/mainline_bucket/whattank1.jpg)
(http://i300.photobucket.com/albums/nn38/mainline_bucket/whattank2.jpg)

Title: Re: id my bits?
Post by: JohnnyO on November 05, 2010, 08:07:20 pm

That looks like an RM125A or B pipe.
I'd say the tank is YZ125G.

Title: Re: id my bits?
Post by: Davey Crocket on November 05, 2010, 08:11:54 pm

Ditto for old JohnnyO.

Title: Re: id my bits?
Post by: TM BILL on November 05, 2010, 08:13:46 pm

Pipe looks like PE 175 or maybe RM 125N or T

Title: Re: id my bits?
Post by: Hotelmoto on November 05, 2010, 08:20:04 pm

Tap is on wrong side for a 125 G

Title: Re: id my bits?
Post by: JohnnyO on November 05, 2010, 08:25:04 pm

Ok how about YZ250G.

Title: Re: id my bits?
Post by: Hotelmoto on November 05, 2010, 08:40:57 pm

Yes, I think so Johnny O

Title: Re: id my bits?
Post by: DR on November 05, 2010, 08:43:45 pm

The small wheel is JR50, the larger rear wheel is YZ Yamaha and the milk crate the tank's sitting on is no doubt stolen ;) as for the other parts I have no idea ;D

Title: Re: id my bits?
Post by: lukeb1961 on November 05, 2010, 09:03:11 pm

tank, I'd say YZ125E
and the pipe is.. hmm..   RM125N.
the little wheel -  JR50C  :D

Title: Re: id my bits?
Post by: Grunter215 on November 05, 2010, 10:00:52 pm

Hey mainline , wanna sell pipe   PM sent. Cheers

Title: Re: id my bits?
Post by: mainline on November 05, 2010, 10:36:11 pm

you guys are too good.

I'm now thinking the tank is either 250F or G, I've looked at the VMX mag with the article on them and I can't tell the difference? The reason I was thinking 125 is that I thought the 250 tanks were much larger.

The pipe is indeed either rm125n or t. Funnily enough I've got a PE175 and a pipe for an Rm125N  in the shed, and I didn't even think to look. The guy had passed the whole lot off as yz125f stuff, so I figured he'd just got the year wrong, not the brand as well ;D

The small wheel is a JR50, 1994 model, well spotted. The larger is YZ Yamaha, kudos to you Doc ;D

I'm also positive the milk crate is stolen ;)

And yes the pipe is available for sale, I have three pipes for one bike so......

Title: Re: id my bits?
Post by: head on November 06, 2010, 09:41:56 am

If tank is 250G I would be interested. Have sent you a PM.