OzVMX Forum

Marketplace => Wanted => Topic started by: Tim754 on January 14, 2008, 11:18:09 pm

Title: Yamaha DT100 parts
Post by: Tim754 on January 14, 2008, 11:18:09 pm

Yep 1974 model -437- Is a restore to OK type Job ,anything at all new or used.  ;) Lets see SL70 Check. SL125 Check, DT100 Check, leaves Kawasaki G5 100 and Suzuki TS 90/100 to get.  That is sad................ ::)  Hodakas ? been there before !a lot more than most  so no no no. Cheers Tim

Title: Re: Yamaha DT100 parts
Post by: Quicksilver on January 15, 2008, 06:45:00 am

I have some MX100s if anything from them will help you out. One very rough but going bike and one pulled to bits.

Title: Re: Yamaha DT100 parts
Post by: Tim754 on January 15, 2008, 02:19:47 pm

Thanks Quicky but I think you have the smaller  wheeledDT100. This one was the full sized bike a DT100a with the cast iron barrel. Causes a lot of confusion the two separate bikes made around the same era. Still I am not going on with it any way as the bike is a total wreck, and more importantly the ID numbers have been removed!!!! This was genuinely not noticed by the family that has it. Cheers Tim.   All not lost have a very early  TS125 only mssing a couple of small bits  too soothe the pain ;)

Title: Re: Yamaha DT100 parts
Post by: cyclegod on January 15, 2008, 03:11:35 pm

I had one of these as my first bike, I can recommend it for your small bore stable.

http://cgi.ebay.com.au/Yamaha-90cc-Trail-bike-Early-70s-Good-Condition_W0QQitemZ160198286713QQihZ006QQcategoryZ102679QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Title: Re: Yamaha DT100 parts
Post by: Tim754 on January 15, 2008, 05:34:04 pm

First full sized new bike I rode  ( my best mates, same colour too have old photos). He actually has his eyes on that very same add and a lot of spare change and lives 2 kms from the seller, hope he is the lucky one ;) :) Cheers and Thanks  Tim

Title: Re: Yamaha DT100 parts
Post by: Quicksilver on January 15, 2008, 08:15:51 pm

Yeah Tim thats right. My use 16inch rear wheel.  Slightly bigger then the 80s really. I know of an early 70s DT100 still in original nick and has rego. If your interested I can ask the bloke what his doing with it. He is a wheeler and trader so he will sell it, just dont how much he'd want.

Title: Re: Yamaha DT100 parts
Post by: Quicksilver on January 15, 2008, 08:17:53 pm

Better still. If he wants to part with it i'll PM you his phone number and you two can sort it out between yourselves.

Title: Re: Yamaha DT100 parts
Post by: Tim754 on January 15, 2008, 08:57:01 pm

Sounds good please do. :) cheers Tim

Title: Re: Yamaha DT100 parts
Post by: Quicksilver on January 16, 2008, 10:09:14 am

Tim.
This is the bike. Just took this picture 20mins ago. Bloke had to duck out while I was their, will get futher details and PM if this bike interests you. Interested?

[attachment deleted by admin]

Title: Re: Yamaha DT100 parts
Post by: vandy010 on January 16, 2008, 10:36:08 am

i know all those early 100's/125's/175's can look pretty similar but that green tank is my favourite.

Title: Re: Yamaha DT100 parts
Post by: Tim754 on January 16, 2008, 04:41:01 pm

Nice!!! 75 model I would say by colour. is good. Cheers Tim

Title: Re: Yamaha DT100 parts
Post by: Quicksilver on January 16, 2008, 06:32:13 pm

No worries Tim. Will slip around and see him again tomorrow. Happy to put you onto the bike, after that its between you guys to sort out the details.
Cheers Quicky.

Title: Re: Yamaha DT100 parts
Post by: Quicksilver on January 16, 2008, 06:33:19 pm

I can help with pick up or sort term storage should you need it.

Title: Re: Yamaha DT100 parts
Post by: Tim754 on January 16, 2008, 08:03:07 pm

Posted last up at 5.32 Quicky, 5.55 got a phone call I have been put off my work permanently >:(... Please do call in as I like to speak to the fellow still positively . Cheers mate and thanks again. Tim ;)

Title: Re: Yamaha DT100 parts
Post by: Freakshow on January 16, 2008, 09:59:28 pm

Quote from: Quicksilver on January 16, 2008, 06:33:19 pm

I can help with pick up or sort term storage should you need it.

If timbo gets it, ask him to pick up the TM stuff, otherwise it will be next xmas before i see anything of that  :'(

Title: Re: Yamaha DT100 parts
Post by: Quicksilver on January 16, 2008, 10:23:45 pm

Ahhh Freaky... ;D
You'll get it. Dont sweat it.....Theirs a YZ here to thats gotta go down south too. One way or another they'll end up in the right place's.

Title: Re: Yamaha DT100 parts
Post by: Quicksilver on January 17, 2008, 12:11:19 pm

Tim. PM sent with phone contact. Its all up to you now. Best of luck.
Cheers Quicky