OzVMX Forum
Marque Remarks => Spaniards (Bultaco, Ossa, Montesa etc) => Topic started by: cappra on October 25, 2010, 11:08:40 pm
-
Would anyone know if the steering stem from the 38mm Montesa Marzocchi's is the same as the 35mm
VB Marzocchi's or if the KTM/CanAm steering stem is the same. Someone in the past cross threaded the
top nut and I had to ruin the stem to get the top clamp off.
-
VB 35mm stem is a different part number >:(
-
Jared the steering stem in the 35mm VF250 front end is the same part number as the 38mm VE/VF/VG414 and also the H7's. Hope that helps. My VB360 has a 38mm Marzocchi front end in it (shortened 9" travel naturally).
-
KTM stem is different. Fitted KTM 38mm to my 77 vb360 using 38mm zochi yokes from a 414.
-
The triple clamps off that 360 of yours Greg was also KTM...... :-X
-
38mm Marzocchi are legal on Pre78 as long as travel restriction is satisfied. As far as I know the KTM and Monty Marzocchi front ends are inter-changeable although there are several variations of Marzocchi yokes I think? Can-Ams and others (SWM) also have Marzocchi forks. They where some of the best forks generally available at the time.
-
Someone hasn't been using their spell-check....... ::)
-
The triple clamps off that 360 of yours Greg was also KTM...... :-X
There actually on my 360 not off ;D ::)