OzVMX Forum
Marketplace => For Sale => Topic started by: TT on October 18, 2010, 01:23:21 pm
-
These are no longer needed as I'm replacing them with RS parts.
PE250T Rear Wheel. Complete and ready to use. Good brake cable included. Can remove tyre for postage if required. $60.00 plus postage.
(http://i467.photobucket.com/albums/rr37/Tony_T12/_MG_9681.jpg)
(http://i467.photobucket.com/albums/rr37/Tony_T12/_MG_9680.jpg)
2x Rear Guards. One painted, one not. Both trimmed at the same point, but will clean up well. $20.00 each or $30.00 the pair plus postage.
(http://i467.photobucket.com/albums/rr37/Tony_T12/_MG_9676.jpg)
(http://i467.photobucket.com/albums/rr37/Tony_T12/_MG_9677.jpg)
2x Headlights. One N one T. Badly faded. $40.00 for both plus postage. SOLD
250T Shock Absorbers. Rust on both shafts has been cleaned up a bit, but strangely they don't leak and have good damping. ??? $50.00 plus postage SOLD
250T swingarm supplied with new OEM bearings that cost me 75 bucks! >:( $60.00 plus postage.
(http://i467.photobucket.com/albums/rr37/Tony_T12/_MG_9672.jpg)
250N Forks (I think) Seals leak but nice, clean chrome. $30.00 plus postage.
(http://i467.photobucket.com/albums/rr37/Tony_T12/_MG_9679.jpg)
Or buy the lot for $220.00 and I'll pay postage.
-
Hello Tony ,Mark here, I brough a set of wheels of you last week .I will take head lights thanks
-
What diameter are the 250N forks
-
What diameter are the 250N forks
Forks are 36mm. I've also got triple clamps you can have for free if you need.
Hello Tony ,Mark here, I brough a set of wheels of you last week .I will take head lights thanks
Done. I'll get them off tomorrow and let you know the cost.
-
Tony ....Leith was chasing a set of shocks some time ago .....Leith I will give you first bite- if not they are mine if part # match up ;)
Do you still have the eye let bushes ......and can you post the part # on shocks for me to check.
-
The shocks are different part numbers. Is that right??
One is 42103-40600 and the other is 42104-40600.
And yes, the bushes will be included with the shocks.
Remember, the shafts have some rust but I have been using them on a DR and they don't leak............. yet............... :D
-
I will buy the 250n forks and clamps if head doesn't want them I missed this post I would have probably bought everything. ;D
Is the 250t rear wheel cracked at the weld or is the rim good I got my license today maybe I will pick it up. ;D
-
The rim's good. No cracks.
The clamps I have are T model, not N, but you're welcome to them.
If you want the wheel, forks and clamps, I'll do them for 100 bucks posted.
-
Ok Tony still if you want the forks ''head'' let me know.
-
I almost forgot, I've got another seat you can have back too, Frosty.
I've got a feeling, I may even have another set of T forks. I'll check tomorrow.
Failing that, if you need a front end for something, head, I'm picking up a bike tomorrow that's got a disc brake Yamaha front end in it that I'll sell off as it's not correct for the bike. If that's of any help?
-
Oh cool I can use a fair few PE parts :D what bike has the disc front end Tony I am putting as disc front end on my pe400 project bike I have everything bar ts250x front wheel.
-
All I know about this front end is that it's Yamaha. I'll know on Wednesday.
-
are you sure the first # is a 4 .....should be a Sux
-
Deaf, mad and blind it seems........... ::)
Yes, the first digit is indeed a '6'.
-
Stewart is, as always, economical with his words :-)
42103-40600 should be 62103-40600
there is no "thing" listed as a 42103.
-
sold .. ;D Tony I didn't listen to my father either ;) send bank your details to my email Address and I'll fix you up.
-
Must of missed this thread. Are the shocks sold?
-
Yep. about 10 minutes ago. Sorry.... :-\