OzVMX Forum

Marketplace => For Sale => Topic started by: Nathan S on October 13, 2010, 10:45:28 pm

Title: YZ125C + MX125C project bikes plus extras.
Post by: Nathan S on October 13, 2010, 10:45:28 pm

See post 18/7/11 (fourth post on page 2) for significant revision!

All there, needing normal rebuild stuff.

Matching numbers, with original steel handlebars (straight!).

$600 complete, or $400 without fuel tank.

Pics in the next few days.

In Yass, southern NSW (near Canberra) Can deliver to Sydney/Wollongong/Canberra in the near future, if that helps?

Nathan
04000 23847.

Title: Re: YZ125C project bike.
Post by: SimonC on October 14, 2010, 12:01:42 pm

Hi Nathan

I am needing a carby and rear guard for my 125c - do you have anything spare?

cheers

Simon

Title: Re: YZ125C project bike.
Post by: Nathan S on October 14, 2010, 12:09:57 pm

I've got a spare 30mm Mikuni, but I'm not sure if I've got a spare YZ125C one - will have to check.
No decent 125C rear guards - do have a rough 125X guard if you are prepared to paint it?

Title: Re: YZ125C project bike.
Post by: mick25 on October 15, 2010, 08:51:08 pm

I sent you a pm nathan no reply, will try here just seeing if you still have the tank 4 sale, 4 the 125 c
Thanks mick

Title: Re: YZ125C project bike.
Post by: steveo247 on October 16, 2010, 01:06:19 pm

waiting for pics  :)

Title: Re: YZ125C project bike.
Post by: TM BILL on October 16, 2010, 02:15:23 pm

Nathan check your Pms  ;D

Title: Re: YZ125C project bike.
Post by: Nathan S on October 17, 2010, 05:07:09 pm

Some bits a bit rougher than I remembered, so price/spec is negotiable.

Your choice of fuel tanks. I put the bog in the yellow one, and its about the same as the white one underneath. Finger points to the heaviest bog applications.

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/SpareYZ125C/DSCN1391.jpg)

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/SpareYZ125C/DSCN1390.jpg)

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/SpareYZ125C/DSCN1426.jpg)

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/SpareYZ125C/DSCN1427.jpg)

Shock seems to have good chrome, but is obviously leaking. I have other shocks if you want to take your chances with them instead.

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/SpareYZ125C/DSCN1386.jpg)

Airbox seems intact (they often break in two).

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/SpareYZ125C/DSCN1385.jpg)

Cylinder is on a fairly small bore - 2nd or 3rd OS, IIRC (Wiseco do up to +2.00mm).
Needs a big end, or I can supply a crank with a decent used rod in it.

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/SpareYZ125C/DSCN1394.jpg)

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/SpareYZ125C/DSCN1395.jpg)

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/SpareYZ125C/DSCN1396.jpg)



Forks are the what rougher than I remembered. There's three in the pic: two legs with decent chrome on the seal area, and the third to make a pair (the good ones are both from the same side). Alternatively, if you're happy to rechrome, then there's several pairs that need rechroming - will sell with them for less money if that suits.

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/SpareYZ125C/DSCN1392.jpg)

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/SpareYZ125C/DSCN1393.jpg)



Seat foam isn't as bad as it looks. The old upholstery trick of using a thin layer of foam should easily hide the imperfections. New foams are available too.

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/SpareYZ125C/DSCN1399.jpg)

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/SpareYZ125C/DSCN1387.jpg)

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/SpareYZ125C/DSCN1388.jpg)

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/SpareYZ125C/DSCN1389.jpg)


Photos of other spare bits - not included, but just in case you're worried "What if the XX is missing?":

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/SpareYZ125C/DSCN1407.jpg)

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/SpareYZ125C/DSCN1406.jpg)

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/SpareYZ125C/DSCN1403.jpg)

Title: Re: YZ125C project bike.
Post by: SimonC on October 18, 2010, 12:11:18 pm

Thanks Nathan

PM sent.  I woyuld be keen on the 30mm carb and the mudguard.

Simon

Title: Re: YZ125C project bike.
Post by: Freakshow on March 31, 2011, 03:06:27 pm

Hey NAthan what of this YZ  if any you got left ?

Title: Re: YZ125C project bike.
Post by: SimonC on April 01, 2011, 12:25:01 pm

I am still cahsing some bits as well if there is anything left.

Simon

Title: Re: YZ125C project bike.
Post by: Nathan S on April 01, 2011, 12:47:08 pm

All still here.
Call me (this includes you, Mr IT400C).

N.  :)

Title: Re: YZ125C project bike.
Post by: mickj on April 16, 2011, 09:33:05 pm

Nathan
 Im after a airbox for my 125X or & as near to a complete 125c albeit in pieces as I can get
 Pm me thanks

Title: Re: YZ125C project bike.
Post by: Freakshow on April 18, 2011, 12:01:48 am

Nath you were getting back to me about the seat and the motors, made any headway yet ?

Title: Re: YZ125C project bike.
Post by: Freakshow on April 21, 2011, 12:38:35 pm

nathan are you ever going to get back to me ????

Title: Re: YZ125C project bike.
Post by: Nathan S on April 21, 2011, 03:18:35 pm

You in a hurry?
If so, then the answer is "No"....
The boxes of stuff are currently buried very deeply and not easily accessed.

If you start waving cash, then I'll drag 'em out and sort through them... until then, you'll have to wait until I sort through my backlog of crap.
 :)

Title: Re: YZ125C project bike.
Post by: Freakshow on April 21, 2011, 03:23:33 pm

OK.  Just figured you had posted up cause you were actually selling this stuff  :-X

Title: Re: YZ125C project bike.
Post by: Nathan S on April 21, 2011, 08:36:45 pm

I posted up what I'm selling. You were the one that wanted extra.

Title: Re: YZ125C project bike.
Post by: Freakshow on April 22, 2011, 10:05:58 pm

more more i want more ..................

Title: Re: YZ125C project bikes plus extras.
Post by: Nathan S on July 18, 2011, 10:26:22 pm

Now selling all of my 125C stuff.

All parts mentioned before, plus another almost complete bike including tank and airbox (missing only plastics AFAIK):
Frame,
Two swingarms,
A very good tank in place of the ok white tank previously mentioned (yellow tank still included).
Another set of wheels,
small quantity of NOS parts,
Several other new bits (chain & sprockets, old-style grips and levers, old-style tyres, VMX Plastics front # plate, seat cover etc etc)

Pics not particularly well organised, and not of everything, but will give you an idea:
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1964.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1959.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1958.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1957.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1956.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1958.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1955.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1953.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1952.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1950.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1954.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1949.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1948.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1947.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1945.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1946.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1944.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1943.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1942.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1940.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1939.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1938.jpg
http://i46.photobucket.com/albums/f128/annaandnathan/DSCN1937.jpg

Also have a 1976 MX125C project bike. Has YZ125C motor, recovered seat, good wheels with very good tyres, new chain & sprockets, grips, etc. Missing pipe, airbox and tank (can supply DT parts to get you out of trouble).
Pics on request.

$1500 for the WHOLE lot, will seperate (but like always, don't bother trying to buy just the fuel tank unless you're going to make it really worth my while)...

Nathan.
04000 23847.

Title: Re: YZ125C + MX125C project bikes plus extras.
Post by: Freakshow on July 19, 2011, 12:09:15 am

interested in a seat at least

Title: Re: YZ125C + MX125C project bikes plus extras.
Post by: Nathan S on July 27, 2011, 10:03:26 pm

Bump for Mark with the Suzuki.

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/DSCN1987.jpg)

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/DSCN1986.jpg)

Title: Re: YZ125C + MX125C project bikes plus extras.
Post by: ted on July 27, 2011, 10:29:34 pm

You ever considered selling real estate Nath...hehe

http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/SpareYZ125C/DSCN1399.jpg

Seat foam isn`t as bad as it looks

Title: Re: YZ125C + MX125C project bikes plus extras.
Post by: Freakshow on July 27, 2011, 11:02:38 pm

im after it for a decent base.

Title: Re: YZ125C + MX125C project bikes plus extras.
Post by: Nathan S on July 28, 2011, 11:36:23 am

Quote from: ted on July 27, 2011, 10:29:34 pm

You ever considered selling real estate Nath...hehe

http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/SpareYZ125C/DSCN1399.jpg

Seat foam isn`t as bad as it looks

Ah Teddles, if I was in real estate (or wanted to be), I'd have said something like "The seat foam has good bones"...

What I actually said is that it is better than it looks - including the unstated acknowledgement that it looks like crap. If I wanted to claim that its a great seat foam, I'd have said that - but I'm not, so I didn't.

Further, my statement was "isn't as bad as it looks" [in the photo], and you're basing your assessment on... what it looks like in the photo.

 ;D

Its all pretty moot when you can buy new foams from GMC for ~$100.

Title: Re: YZ125C + MX125C project bikes plus extras.
Post by: Freakshow on July 28, 2011, 04:19:55 pm

Still interested in buying a seat and other bits.  Are you any c,oser to spliting it up in bit sized managable peices for us yet ?

Title: Re: YZ125C + MX125C project bikes plus extras.
Post by: Freakshow on July 28, 2011, 04:21:49 pm

Do you have a Swing arm 401-22141-00 or 2J5-25381-01 or anytihg that slots ina YZ- mx A/B frame ???

Title: Re: YZ125C + MX125C project bikes plus extras.
Post by: Slakewell on July 28, 2011, 05:06:57 pm

Have you sold the MX-C yet

Title: Re: YZ125C + MX125C project bikes plus extras.
Post by: Nathan S on July 28, 2011, 07:20:37 pm

No and no. :) Although I could probably help you out with a DT swing arm, Freaky.

Title: Re: YZ125C + MX125C project bikes plus extras.
Post by: Freakshow on July 29, 2011, 11:18:10 pm

nah had to cut out a YZa bolt so i need one for the 125 swingarm.  also a decent base for the yzc

Title: Re: YZ125C + MX125C project bikes plus extras.
Post by: Nathan S on July 30, 2011, 06:35:32 am

I was talking about a DT125 swingarm.

Seat base still here. Make an offer that makes it worth my while to separate.

Title: Re: YZ125C + MX125C project bikes plus extras.
Post by: Freakshow on August 02, 2011, 12:47:14 pm

but you had 2 of them ???

Title: Re: YZ125C + MX125C project bikes plus extras.
Post by: Nathan S on August 02, 2011, 01:21:15 pm

And two complete bikes.

Title: Re: YZ125C + MX125C project bikes plus extras.
Post by: Nathan S on August 05, 2011, 12:04:58 pm

$750 for a complete bike made up of the best bits (your choice of bits).
$350 for a complete bike made up of the second best bits.

Or $1000 for all of the YZ-C bits.

Ebay soon.

Title: Re: YZ125C + MX125C project bikes plus extras.
Post by: steveo247 on August 08, 2011, 09:07:33 pm

hey nathan sorry not related to your sale, but can you tell me if the yz 125c side covers are different to the mx 125c?
i think they might be due to monoshock vs twinshock?

thanks mate.

Title: Re: YZ125C + MX125C project bikes plus extras.
Post by: mainline on August 08, 2011, 09:42:30 pm

They are different, cutaways to clear the shocks on the MX