OzVMX Forum

Marketplace => Wanted => Topic started by: jimg1au on October 12, 2010, 01:52:59 pm

Title: WANTED YAMAHA DT1/RT1 TYPE REAR BRAKE PEDAL & ARM TYPE
Post by: jimg1au on October 12, 2010, 01:52:59 pm

hi
need a rear brake for my flat track bike.i need a brake rhs pedal that is in 2 parts.the rod an arm need to be inside back of frame so the kick starter will still work.
most guys in the usa use starters for these bikes and biuld disc brakes on the rhs cant use the kicker then
yamaha rt1 2 3 or dt1 2 3 type is what i am after
thanks
jim

Title: Re: WANTED YAMAHA DT1/RT1 TYPE REAR BRAKE PEDAL & ARM TYPE
Post by: firko on October 12, 2010, 02:05:27 pm

Jim....I can give you a stock DT1 brake pedal if that'll do you...just come and get it mate.

Title: Re: WANTED YAMAHA DT1/RT1 TYPE REAR BRAKE PEDAL & ARM TYPE
Post by: jimg1au on October 12, 2010, 03:39:49 pm

mark
is it both parts because the other part isthe 1 i need as i have to cut and shut the pedal
jim

Title: Re: WANTED YAMAHA DT1/RT1 TYPE REAR BRAKE PEDAL & ARM TYPE
Post by: Tim754 on October 12, 2010, 08:38:24 pm

Some old shitters of the required 360 arm/pedal went to Nathan S's from my place ;) Tim754

Title: Re: WANTED YAMAHA DT1/RT1 TYPE REAR BRAKE PEDAL & ARM TYPE
Post by: Nathan S on October 12, 2010, 09:53:54 pm

Definitely got the shaft with the arm, not so sure about the pedal itself.

Title: Re: WANTED YAMAHA DT1/RT1 TYPE REAR BRAKE PEDAL & ARM TYPE
Post by: jimg1au on October 12, 2010, 10:23:17 pm

thats good as firko definitly has the arm. this is good.now i need a small peice of 10mm alloy plate
jim

Title: Re: WANTED YAMAHA DT1/RT1 TYPE REAR BRAKE PEDAL & ARM TYPE
Post by: firko on October 12, 2010, 10:28:35 pm

Quote

.now i need a small peice of 10mm alloy plate

I can help you there as well Jim. ;)

Title: Re: WANTED YAMAHA DT1/RT1 TYPE REAR BRAKE PEDAL & ARM TYPE
Post by: Freakshow on October 13, 2010, 12:27:31 pm

heaps of pedals on ebay