OzVMX Forum

Marque Remarks => Honda => Topic started by: gage on October 03, 2010, 01:00:16 pm

Title: CR125M 1974 Parts Wanted
Post by: gage on October 03, 2010, 01:00:16 pm: Chasing a few things to keep the Elsinore restoration going:

1. Complete seat or will consider the metal seat pan on its own.
2. Throttle housing
3. Front rim - don't need the hub, just a good straight rim with no cracks - i have two badly cracked ones already.
4. CDI chain cover.
5. Bottom fork cases with the internals - have two NOS tubes.
6. Original air cleaner assembly.

I am in Perth, W.A. locals would be great but I am happy to pay postage for the right parts.

Cheers, Ron
Title: Re: CR125M 1974 Parts Wanted
Post by: Davey Crocket on October 03, 2010, 01:20:42 pm: For an air-cleaner ring GMC, he's on the forum and does the complete unit....best in the world!!.
Title: Re: CR125M 1974 Parts Wanted
Post by: cyclegod on October 03, 2010, 01:32:43 pm: http://cgi.ebay.com/ebaymotors/77-CR125-M-FRONT-RIM-1-60-X-21-ALUMINUM-D-I-D-JAPAN-_W0QQcmdZViewItemQQhashZitem3360e026edQQitemZ220668634861QQptZMotorcyclesQ5fPartsQ5fAccessories

http://www.dcvmx.com/xcart/product.php?productid=17821&cat=0&page=3

http://www.vintagemx.us/cgi-bin/largephoto.cgi?C=a7AbzfA4DSJ6VeKH
Title: Re: CR125M 1974 Parts Wanted
Post by: gage on October 03, 2010, 01:46:42 pm: Thanks for the links Cyclegod.
I enquired about the rim in Canada, they quoted $300.00 for postage - guess they can't be bothered posting to OZ.
The clutch and sidecover I emailed on Thursday - still waiting for a reply.
Thought you used to have a few Elsinore bits yourself, Cyclegod - all gone?

Regards, Ron
Title: Re: CR125M 1974 Parts Wanted
Post by: cyclegod on October 03, 2010, 02:57:37 pm: I sold all my elsinore stuff last year, as for Canada post the fee is about right as anything posted from there is ridiculously expensive (I found it cheaper to UPS to the states then post from there ;))
Title: Re: CR125M 1974 Parts Wanted
Post by: micks on October 03, 2010, 06:49:44 pm: think eldorado motorcycle seats in s.a have a complete replica
Title: Re: CR125M 1974 Parts Wanted
Post by: smed on October 03, 2010, 08:40:31 pm: complete repro seat,$154.61 aud+ post$72.51 aud.Ebay U.S. item no 400135081431,seller I.D. hondaclassic31,they have other honda seats & goodies also,bit exy on the postage but cheers.Smed
Title: Re: CR125M 1974 Parts Wanted
Post by: frank jnr on October 06, 2010, 10:42:24 pm: PM Bigk on here, I guessing he maybe able to assist you with most of what you are chasing...
Title: Re: CR125M 1974 Parts Wanted
Post by: gage on October 09, 2010, 03:54:26 pm: Eldorado in S.A. charge $500.00 for an Elsinore seat - the one on ebay Vietnam at $150 plus postage is looking affordable.
Still no luck with any of the other parts yet.
Must be heaps of Elsinore stuff stashed away in sheds around Australia - looks like no one wants to part with it.
Title: Re: CR125M 1974 Parts Wanted
Post by: cyclegod on October 09, 2010, 04:54:44 pm: Could you use another bike?

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=280571627863&ssPageName=STRK:MEWAX:IT
Title: Re: CR125M 1974 Parts Wanted
Post by: Davey Crocket on October 09, 2010, 07:37:59 pm: Remember, if its a racer you want a good seat...not a sacked out sponge, if your a big guy you will appreciate a firm seat to help you go from sitting to standing 30 times a lap. Ya gets what ya pays for these days...ps..most car motor trimmers have NO idea about how hard/soft a bike seat should be. E74 on this forum is into Honda shit.....send him a pm. ;)
Title: Re: CR125M 1974 Parts Wanted
Post by: gage on October 09, 2010, 08:26:43 pm: Cyclegod, I have been watching the one on ebay. Looks not too bad, but I might be in a bit of strife if another Elsinore appears in the shed.

Davey Crocket, I know where you're coming from and I would prefer an original seat, but a decent one seems to be pretty hard to find. I'm around 75kg - if I can find a decent seat pan, the moulded foam for the CR's are readily available, as are the vinyl covers.

Thanks for the feedback - I'll keep looking.
Title: Re: CR125M 1974 Parts Wanted
Post by: YZ250H on October 09, 2010, 08:52:10 pm: Quote from: cyclegod on October 09, 2010, 04:54:44 pm
Could you use another bike?

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=280571627863&ssPageName=STRK:MEWAX:IT
Shhhhhhhh... Don't advertise the damn thing ::) ;D. This could be my get into VMXWA ;)
Interesting to see what it ends up at. If it goes anywhere near the money you want for yours then forget it - yours is far better value.
Title: Re: CR125M 1974 Parts Wanted
Post by: YZ250H on October 11, 2010, 08:31:09 pm: Very Happy ;D - now I can play with VMXWA.
Title: Re: CR125M 1974 Parts Wanted
Post by: Rossvickicampbell on October 13, 2010, 08:59:30 pm: 1974 CR125M - motor has been done including balanced everything etc - mechanically excellent - cosmetically needs some TLC - $2500 - know anybody that would be interested.

cheers

Rossco
Title: Re: CR125M 1974 Parts Wanted
Post by: YZ250H on October 14, 2010, 10:18:25 am: Do you have a secret stash of colloectable models you are not telling us about Rossco ;D ;D ;D
Title: Re: CR125M 1974 Parts Wanted
Post by: gage on October 16, 2010, 07:21:50 pm: Not having any luck with the Elsinore parts
Must be tons of this stuff out there gathering dust
Come on guys, stop hoarding and help get another old Elsinore out on the VMX track
Title: Re: CR125M 1974 Parts Wanted
Post by: cyclegod on October 16, 2010, 08:22:06 pm: http://www.vintagemx.us/cgi-bin/largephoto.cgi?C=Nhs92rCVySS5NcXz&w=4
Title: Re: CR125M 1974 Parts Wanted
Post by: gage on October 18, 2010, 08:16:48 pm: Add a swingarm to the list of parts I am after to suit the CR125M

Cyclegod, I have given up on the seat you kindly sent the link for. Was emailing back and forth all of last week but couldn't get him to give me postage costs to Perth.
Title: Re: CR125M 1974 Parts Wanted
Post by: Rossvickicampbell on October 18, 2010, 09:34:03 pm: spare bike available in Perth???????????????
Title: Re: CR125M 1974 Parts Wanted
Post by: gage on October 18, 2010, 09:49:19 pm: Rossvicki, I'm having enough trouble trying to finish the one I have and I would be in serious trouble if another one appears in the shed - I'm sure most of you guys know what I mean.
You wouldn't happen to have any of the bits I'm after would you??