OzVMX Forum

Marque Remarks => Husqvarna => Topic started by: huskibul on September 28, 2010, 02:27:27 pm

Title: 81/82/83 430 pipe's
Post by: huskibul on September 28, 2010, 02:27:27 pm
   Hey fella's ,anybody out there in huskyland know if the 81' / 82' 430 pipe will fit a n 83' 430 ,are there any difference's in mounting points/ header etc ?  also are the wr/xc/cr pipes interchangeable ? i know they have different dimensions/characteristics but do they fit? cheers in advance :)
Title: Re: 81/82/83 430 pipe's
Post by: PEZBerq on September 28, 2010, 10:18:13 pm
The 83 frame (first white bike) is different to the earlier models. The mount point to the frame near stinger is different I believe. Mount is vertical instead of horizontal.  Front mount to frame should be the same. Pipes should be interchangeable between all models.
Title: Re: 81/82/83 430 pipe's
Post by: huskibul on September 29, 2010, 08:10:28 am
    Thanks for that Pez! i thought that might have been the case with the 81/82 top shock/frame layout, i would  like to eventually get a gmc pipe ,spoke to geoff but he's only done a few 81/82,wasnt sure of 83', it's a long shot but anybody in Vic thinking of getting one done for an 83 430' ??? pm me ,cheers
Title: Re: 81/82/83 430 pipe's
Post by: crabman on September 29, 2010, 11:51:40 pm
Any chance that you may know of somebody making a pipe for the CR 500?
Will appreciate some help.
Thanks
Crabman
Title: Re: 81/82/83 430 pipe's
Post by: huskibul on September 30, 2010, 08:09:32 am
   Hey crabman, try Geoff Morris  who goes under "GMC" in the forum ,send him a PM, pretty sure he does them for the 500's, i think there a pic of one floating around in here somewhere (very trick bit of kit !),cheers
Title: Re: 81/82/83 430 pipe's
Post by: Mike52 on September 30, 2010, 09:18:07 am
85 and 86 240 WR,s are very different. :o
mike
Title: Re: 81/82/83 430 pipe's
Post by: GMC on September 30, 2010, 09:20:04 am
According to my limited husky knowledge....
the 81 & 82 430's are the same fitment
and
the 83 & 84 500's are the same fitment
but I am not sure about 83 430's


81-82 430

(http://i15.photobucket.com/albums/a393/gmcloa/Pipes/Husky430-pipe.jpg)



82-83 500

(http://i15.photobucket.com/albums/a393/gmcloa/Pipes/Husky84CR500-1.jpg)
Title: Re: 81/82/83 430 pipe's
Post by: huskibul on September 30, 2010, 11:51:31 am
   Hey geoff, ive just lined up my (rough)83' 430 pipe and that 81/82' looks identical except both mounts ,mine has the front one on top and rear one horizontal (like the 83' 500) will send a pm cheers
Title: Re: 81/82/83 430 pipe's
Post by: spicydave on October 04, 2010, 11:36:52 pm
Price on these pipes?

Can you make one for a 1983 240?