OzVMX Forum

Clubroom => Tech Talk => Topic started by: steve7406 on September 20, 2010, 05:15:10 pm

Title: rm shockers
Post by: steve7406 on September 20, 2010, 05:15:10 pm

Nearly finished  a rebuild on a rm250t want to put piggyback shocks on it what lenth should they be.

Title: Re: rm shockers
Post by: oldfart on September 20, 2010, 05:19:44 pm

STD are around 16''  or  407mm

Title: Re: rm shockers
Post by: LWC82PE on September 20, 2010, 05:48:38 pm

Check your measurement Stew, original is under 400mm about 396/397mm. 407mm would probably still be ok though.

Steve, if you want to get rid of your original 250T shocks let me know.

Title: Re: rm shockers
Post by: suzuki27 on September 20, 2010, 06:09:31 pm

Stick with standard or a few mm either side.  385mm to 395mm is best.This will change if you change the front end etc. The RMT's get a bit weird after 405mm - even at 405mm I reckon.  Stay close to stock.