OzVMX Forum
Marketplace => Wanted => Topic started by: steveo247 on August 19, 2010, 10:23:59 am
-
gday,
I'm looking for an undamaged left hand crankcase for my 125X.
Mine has been smashed from a chain and i'm hoping to find another good one, and use my mangled one for the race bike.
Im also looking for the crankcase cover for that side. T
heres a few on ebay, but if i can not have to ship these out from america id be much happier!
The crankcases are the same on the 125C and X, and i think the A/B cases would fit too? (can someone help with that?)
I'll take a whole motor if i need too!
Contact me on here,
or email on [email protected]
thanks very much.
steve.
-
I'm looking for an undamaged left hand crankcase for my 125X.
The crankcases are the same on the 125C and X, and i think the A/B cases would fit too?
A/B will be different.
externally the magneto cover is different, internally i'm unsure.
i'm led to believe the TY175 is the same as the C/X but as usual, i've been wrong before.
-
what about the 76+ Dt 125 / 175 ?
-
what about the 76+ Dt 125 / 175 ?
Dad thought that too. I can only go off part numbers, and they are different?
-
Ok well thats all i have for you.........
-
YZ125C/X and probably TY175 are the same.
The other likely candidates (DT, earlier/later YZes etc) are all different, in one way or another (usually relating to the shift drum and/or the rods the shift forks slide along, at least).
I've got a spare YZ-C case, but will have to confirm condition before making any big promises.
May also have a spare ignition cover too.
-
YZ125C/X and probably TY175 are the same.
The other likely candidates (DT, earlier/later YZes etc) are all different, in one way or another (usually relating to the shift drum and/or the rods the shift forks slide along, at least).
I've got a spare YZ-C case, but will have to confirm condition before making any big promises.
May also have a spare ignition cover too.
looking forward to hearing your reply mate!
i think i have the cover sorted..
-
YZ125C/X and probably TY175 are the same.
YES THEY ARE.
Here is a recent one I repaired
(http://i677.photobucket.com/albums/vv132/mc125mick/GLENNPICKERING002.jpg?t=1282305311)
machined weldable piece.
(http://i677.photobucket.com/albums/vv132/mc125mick/GLENNPICKERING009.jpg?t=1282305655)
welded, prior to invisible machining finish and dremal finish.
(http://i677.photobucket.com/albums/vv132/mc125mick/GLENNPICKERING.jpg?t=1282306014)
Run a twenty mm reamer through the finished repair, beautiful ;).
-
YZ125C/X and probably TY175 are the same.
YES THEY ARE.
Here is a recent one I repaired
(http://i677.photobucket.com/albums/vv132/mc125mick/GLENNPICKERING002.jpg?t=1282305311)
machined weldable piece.
(http://i677.photobucket.com/albums/vv132/mc125mick/GLENNPICKERING009.jpg?t=1282305655)
welded, prior to invisible machining finish and dremal finish.
(http://i677.photobucket.com/albums/vv132/mc125mick/GLENNPICKERING.jpg?t=1282306014)
Run a twenty mm reamer through the finished repair, beautiful ;).
Thats a erally tidy repair mick-de!
If i cant find one, you'll have a PM !