OzVMX Forum
Marque Remarks => Kawasaki => Topic started by: suzuki43 on August 13, 2010, 01:40:13 pm
-
Surely someone has one of these in Victoria??....(as seen on Marks swapmeet)
Hello all , i need some help if you can. Would any one in the LA.CA. area have a complete KX500 1983 with a good original pipe and silencer for sale or hire , as i have a need for one to fabricate some pipes for this model. I can arrange transport . I have a local reliable honest guy to oversee all of this and some one coming over from Australia soon to help as well. My research has shown there is no aftermarket pipes available for this model, and hope to have a quantity made. Any help or feed back (world wide) would be geatly appreciated .
cheers Robin Gregory
Robin Gregory
Traralgon, Victoria, Australia
-
I'm pretty sure Geoff Morris Concepts has done pipes for these. He's near Broadford Vic.
And you won't find better workmanship anywhere. ;)
-
Yes GMC has made a pipe for the KX500A1. I have seen it and it looks sensational, as do all his pipes. He has it all jigged and ready to go.
-
I've got a GMC pipe on my '84 KX500 (which is the same as the '83 pipe) and it's a beautiful piece of work.. it looks like a 'factory' pipe.
-
John,
I think someone had told you a furphy. The 83 & 84 pipes are very different. The stinger diameter is different by 2 maybe 3 mm. The fitting into the head is completely different between them and don't interchange. An 84 engine and pipe will fit the 83 frame and vice versa, but not individual parts. When i first discussed this with Geoff about 18 months ago i think that he was going to come up with a solution that would allow his pipe to fit either bike, i just don't know how he achieved it, perhaps he will see this and give us an explanation.
Rod
-
Rod i thought geoff told me the pipe he made for my bike would fit either but i may be wrong?
-
bahnsy is right 83 and 84 different
84 pipe a bit fatter but follows same lines as 83
just has different fitting on barrel as rod said ;)
-
If my memory serves me well, Geoff was going to put some thought into being able to produce a pipe that would fit either bike with small mods, im just not sure how he achieved it.
-
Primarily the pipes are the same fitment with the exception of....
# Engine spigot, 84 has O-ring grooves, 83 doesn't, otherwise are the same size
# stinger dia. - 84 is larger.
I can build either spec. out of the same jig.
I have made the prediction though that most will want the 84 spec. stinger to run with modern mufflers.
I jigged this pipe from my 83 and it seems the 4th pipe I have built has fitted Johnnys 84 OK.
Pipes 2 & 3 I haven't heard from so I assume they have fitted OK
But pipe No 1 has come back claiming to not fit quite right allthough it fits back in the jig as snug as any of the others.
I'm at a bit of a loss as to why and I'm wondering if he had the proper mounts. I have some overseas orders for these pipes that I have put on hold until I can be sure what the problem is.
Is their anyone close to Broadford with KX 500 that I could come to and check the fitting of this pipe? Mine is a basket case without plastics so judgement is a bit iffy and the guys that I know have one are all a cut lunch drive away.
-
Hows me RM pipe coming along?.
-
Hows me RM pipe coming along?.
Wait your turn young Davey.
I just pushed a PE 400 pipe out the door last night, young Frosty was lucky he didn't burn his hands on the welds when he picked it up :D
And I'm sure a guy has been waiting for his KDX 175 pipe longer than you ;D
-
GMC, Is it possible for you to post a picture of the 83/84 pipe ?,,many thanks
-
Stuff the KDX blokes pipe.....I know he aint ever gonna pay ya.....and he has a fat arse..... ;D
-
and he has a fat arse..... ;D
The fact that you notice such things is sure to make me nervous in your presence,
and besides, it was just what I was wearing that makes it seem that way ;D
(http://i15.photobucket.com/albums/a393/gmcloa/Pipes/KX500pipe-2.jpg)
-
That looks too big for me RM?....maybe it was the wide angle lense?
-
That looks too big for me RM?....maybe it was the wide angle lense?
You just need to bore it out a bit,
about 4 times it's current size
-
Davey if you come round to my place you can have an even closer look at that KX pipe..
Only took a week from when i ordered it to receiving it :).. but i didn't harass him either
-
Harass?.....we gotta stop talking about arsses....Geoff ill get a complex about it...I didnt even ring this week..... ;D
-
Only took a week from when i ordered it to receiving it
I’m afraid that’s not in keeping with GMC company policy.
A full investigation has been undertaken to find out what went wrong.
It seems there was a communication breakdown between the sales team, the manufacturing team and the dispatch officer.
Steps have been undertaken to ensure that correct procedures are enforced to normal standards
I would like to offer my sincere apologies and personally assure you that this will never happen again.
-
pipes 2 and 3 fit like a glove straight on no probs sweeeeeeet ;D