OzVMX Forum
Clubroom => Tech Talk => Topic started by: rohan on August 01, 2010, 01:47:09 pm
-
I recently cut the ends of a PE250 Suzuki Sparkster with the intent of doing and repack and recap as shown in the very helpfull thread "Silencer Repair for Dummies" by Ji Gantor. After removing the ends i found the suzuki sparkster is a totally different design. Can someone inform me how these things work and how I go about repackig it. Also is the end in picture 2 supposed to be completely full of fibreglass packing? I should mention when i cut off the end in photo 2 a ring the diameter of the muffler and about 10mm wide fell out that was rattling around in there. (http://img.villagephotos.com/p/2010-6/1357440/1.jpg) (http://img.villagephotos.com/p/2010-6/1357440/2.jpg)
-
There is information and photos how to do these mufflers on here
http://groups.yahoo.com/group/PEmotorcycles/
which was done by Alex (shortshift) on here (ozvmx)
Looks like you got the turbine core type.