OzVMX Forum

Marketplace => Wanted => Topic started by: Paddles on June 30, 2010, 10:48:19 am

Title: 43MM right way up Showa fork cap
Post by: Paddles on June 30, 2010, 10:48:19 am

Hi guys, I'm chasing a fork cap for a 43mm right way up Showa fork off my 1986 CR250 if anyone's got one in a box of bits in the shed and is willing to sell. It'll still have an air valve (car type) in the centre and a small hex for removal from the fork upper tube. I only need one (because one of mine has had the air valve bit broken off), but if someone will only sell them as a pair I'll take both.

I don't know what other bikes of this era used a 43mm Showa that may be suitable, can anyone clue me in so I can maybe search for alternatives on ebay or at the wreckers.

Thanx, John.

Title: Re: 43MM right way up Showa fork cap
Post by: motomaniac on June 30, 2010, 12:43:42 pm

I got some , but not sure on the cond. of the valves.I can check.

Title: Re: 43MM right way up Showa fork cap
Post by: Paddles on June 30, 2010, 09:03:09 pm

thanks moto, let me know how you go.

Title: Re: 43MM right way up Showa fork cap (found)
Post by: Paddles on July 06, 2010, 12:42:13 pm

motomaniac has tracked some down for me, many thanks.