OzVMX Forum

Marketplace => Wanted => Topic started by: All Things 414 on June 22, 2010, 07:24:15 pm

Title: YZ 80 J front No plate
Post by: All Things 414 on June 22, 2010, 07:24:15 pm

It seems you can buy nearly anything for one of these little beasts except for the natty front number plate (in front of the radiator).
Can anyone point me in the direction of one please? :(

Title: Re: YZ 80 J front No plate
Post by: paul on June 22, 2010, 08:01:14 pm

mop bucket

Title: Re: YZ 80 J front No plate
Post by: jimson on June 22, 2010, 09:27:28 pm

Just gone my son sold a complete yz80j at CD7 $350 it was all there just needed a engine rebuild  :( jimson

Title: Re: YZ 80 J front No plate
Post by: All Things 414 on June 23, 2010, 06:29:24 am

Bugger! :(

Title: Re: YZ 80 J front No plate
Post by: caps 999 on June 23, 2010, 09:04:03 am

I may still have the number plate off mine Ross

Title: Re: YZ 80 J front No plate
Post by: All Things 414 on June 23, 2010, 11:54:39 am

I'd be forever in your debt Joel if you have one and you'd sell it to me. I'd let you beat me more often....... :)

Title: Re: YZ 80 J front No plate
Post by: All Things 414 on June 29, 2010, 05:27:59 pm

Bump.
Actually any YZ 80 J plastics at all would be really good :-[. Top dollar paid..... :P

Title: Re: YZ 80 J front No plate
Post by: Freakshow on July 03, 2010, 11:01:34 pm

whats the prefix for this model as when i was looking for that 80b stuff for that other bloke i found a shit load or Yz 80 and 100 mechanical parts in there bags still :O)

Title: Re: YZ 80 J front No plate
Post by: caps 999 on July 04, 2010, 12:09:51 am

yz60j=5x1
yz80j= 5x2
yz100j=5x3
yz125j=5x4
yz250j=5x5
yz490j=5x6
yz50j=5x7

Title: Re: YZ 80 J front No plate
Post by: Freakshow on July 04, 2010, 01:15:57 am

ok good on 5x1,5X2,5X4 pistons and ring at least.

Title: Re: YZ 80 J front No plate
Post by: retrowrex on July 04, 2010, 07:54:31 am

Freakshow.

What sort of YZ125J 5X4 bits have you got stashed away?  I have two of those suckers.

retro

Title: Re: YZ 80 J front No plate
Post by: Freakshow on July 05, 2010, 01:05:43 am

i can see 2  ring boxes with that number at least.
maybe big end and bearing if they also take the 93310-425T1 and 2vm11633-00 pin (have about 5 of these) that are in the same divider

most the ealry 80cc stuff i have looks to be 1974-84

few YZ125x and c bits in there going by the numbers
AT-1/2/3
some Dt175 stuff ( actually a lot by the numbers- not sure what else uses that but 125 maybe 100cc for sure)
Dt250 - 1m1 stuff ( intake etc )
Gt80
ty250
Ag200/175
KInda all sorts really lots of  933xxxxx coded type stuff so you cant see what it fits it by looking at the sticker.