OzVMX Forum

Clubroom => Tech Talk => Topic started by: pmc57 on May 16, 2010, 04:13:48 pm

Title: Mikuni Carby ID
Post by: pmc57 on May 16, 2010, 04:13:48 pm

Can anyone with Zedder identify what bike / bikes mikuni carb #13200-41750 suits.
I'm presuming it's off a Suzuki, was told PE250 but it's a 36mm, but I didn't think the PE's went that big.

Thanks Peter

Title: Re: Mikuni Carby ID
Post by: crs-and-rms on May 16, 2010, 04:20:24 pm

its from a pe 250 n 79 model and its 246 in size

Title: Re: Mikuni Carby ID
Post by: pmc57 on May 16, 2010, 04:28:23 pm

crs and rms, what do you mean by 246 in size?

Title: Re: Mikuni Carby ID
Post by: crs-and-rms on May 16, 2010, 05:02:12 pm

thats what comes up on  zedder when i put in the part number under the heading size i dont know what it means sorry

Title: Re: Mikuni Carby ID
Post by: DR on May 16, 2010, 06:36:55 pm

PE250N and 246 is simply the capacity of the engine it came from. The VM36ss is the standard carb for all model PE250's I believe ;)

Title: Re: Mikuni Carby ID
Post by: pmc57 on May 16, 2010, 06:45:21 pm

Thanks Chris, I'm surprised the PE250's had a 36mm carb given most of the RM's of same capacity had 34mm.

Now that I know what it's off, I'll probably put it on the table of items to sell at CD7.

Peter

Title: Re: Mikuni Carby ID
Post by: DR on May 16, 2010, 09:07:33 pm

Pete, so far as I know all the twinshock RM250's all used 36mm carbs as did the 370's and 400's up to 1980 ;)

Title: Re: Mikuni Carby ID
Post by: pmc57 on May 16, 2010, 09:31:15 pm

Chris
I must have been in a another world today, of course the 250's had 36mm carbs, I should have known better. Sorry for bothering all.