OzVMX Forum

Marque Remarks => Honda => Topic started by: spicydave on May 15, 2010, 09:38:45 pm

Title: How much oil - 1980 C125
Post by: spicydave on May 15, 2010, 09:38:45 pm
How much engine oil does a 1980 CR125 take

Thanks
Heinrich
Title: Re: How much oil - 1980 C125
Post by: spicydave on May 17, 2010, 04:12:45 pm
Anyone?

If someone have a electronic Service Manual that is willing to email me I'll appreciate

Thanks
Heinrich
Title: Re: How much oil - 1980 C125
Post by: ianscr250 on May 18, 2010, 12:39:20 pm
for memory about 900 mills of oil in the donk
Title: Re: How much oil - 1980 C125
Post by: 090 on May 18, 2010, 06:00:49 pm
I haven't found out either. There is an oil level bolt on the clutch cover.
Title: Re: How much oil - 1980 C125
Post by: spicydave on May 18, 2010, 06:13:03 pm
I haven't found out either. There is an oil level bolt on the clutch cover.


Yip - I have filled 500ml and opened the level screw until it stopped dripping

Not much came out so I assume the level is at about 490ml
Title: Re: How much oil - 1980 C125
Post by: JohnnyO on May 18, 2010, 06:33:21 pm
700mls. That's straight from the genuine Honda owners manual.
Title: Re: How much oil - 1980 C125
Post by: spicydave on May 18, 2010, 08:13:52 pm
Can I just pop in anothr 200ml?

Title: Re: How much oil - 1980 C125
Post by: JohnnyO on May 18, 2010, 08:20:33 pm
Can I just pop in anothr 200ml?


I guess you could assuming it was completely empty when you put the 500mls in.
Title: Re: How much oil - 1980 C125
Post by: spicydave on May 18, 2010, 09:39:38 pm
Can I just pop in anothr 200ml?


I guess you could assuming it was completely empty when you put the 500mls in.




Yes JohnnyO - I drained the oil and then filled the 500ml

Title: Re: How much oil - 1980 C125
Post by: Rossvickicampbell on May 18, 2010, 11:04:02 pm
there is a difference in fill volumes based on doing an oil change (smaller amount) and refilling after a case split or open (larger amount).  Which one did you do?
Title: Re: How much oil - 1980 C125
Post by: spicydave on May 19, 2010, 02:33:21 am
Thanks guys

I poped in another 200ml and started the bike

Let it ran for a while and cold down

Opened the inspection screw and a tat bit came out

So I assume we at around 700ml and the correct as per the manual JohnnyO as said