OzVMX Forum

Marque Remarks => Honda => Topic started by: TCSA#9 on April 30, 2010, 02:05:54 pm

Title: '84 CR250 Footpegs
Post by: TCSA#9 on April 30, 2010, 02:05:54 pm

For those in the know, can anyone tell me if the '83 pegs are interchangeable with the '84? Parts fisches seem to list the '83 through to '87 with differing numbers.


Cheers
 TC

Title: Re: '84 CR250 Footpegs
Post by: Scunge on April 30, 2010, 03:17:24 pm

I sourced some DR350 footpegs from ebay (after market) and they not only fit my 83 CR250 but they are a LOT wider than the stock Honda jobbies. Pretty cheap as well, which we like!

Not sure about the 84 Honda though!

Title: Re: '84 CR250 Footpegs
Post by: Stevo17 on April 30, 2010, 05:45:38 pm

I just fitted some 89 model YZ pegs on my 84 KX. I had the chance to size up the pegs Caps999 put on his CR480 which were the same YZ pegs. They fitted his 83 CR beautifully. I reckon they will fit the 84 also

Title: Re: '84 CR250 Footpegs
Post by: 090 on April 30, 2010, 09:26:11 pm

'83 and '84 are different. You can be lucky sometimes with a late model set that fits. Bit hit and miss though.

Title: Re: '84 CR250 Footpegs
Post by: caps 999 on April 30, 2010, 09:28:31 pm

yeh kinda fluked mine the 80-94 yz pegs went straight onto the 82 cr480 with out modification

Title: Re: '84 CR250 Footpegs
Post by: motomaniac on April 30, 2010, 09:31:27 pm

84 are a completely different mungrel set up.they dont have a bracket on the frame for the peg to fit between they have a stub that the peg goes over- basically the reverse of the most common style.

Title: Re: '84 CR250 Footpegs
Post by: holeshot buddy on May 02, 2010, 08:49:25 pm

late model ktm pegs will fit your red bikes
with little mods ;)

Title: Re: '84 CR250 Footpegs
Post by: STW996 on May 03, 2010, 10:14:10 am

Take it from me Holey one would know!!!