OzVMX Forum

Marque Remarks => Suzuki => Topic started by: suzuki27 on April 26, 2010, 08:59:17 am

Title: RM125 A conrod problem
Post by: suzuki27 on April 26, 2010, 08:59:17 am

 This 125A was bought with a rebuilt bottom end but the head and barrel were not on it.
The little end of the conrod has a 19mm ID. Too big for any RM 125's I know of!! Would the rod be off a PE175? I hope there is an easy solution.

Title: Re: RM125 A conrod problem
Post by: Lozza on April 26, 2010, 09:21:02 am

There is no problem

http://ozvmx.com/community/index.php?topic=12826.0

Title: Re: RM125 A conrod problem
Post by: huskibul on April 26, 2010, 10:32:53 am

   I have an A bottom end the ID of the rod smallend is 21mm,next to it i have a B/C it is 18mm,next to it is a T it is also 18,my be it is something the other guy was building up, , PE-TS?? dunno maybe check alpha, the id/ part # on A rod is  S 4 , hope that helps  :-\

Title: Re: RM125 A conrod problem
Post by: suzuki27 on April 26, 2010, 10:44:05 am

Thanks for that men.