OzVMX Forum
Marque Remarks => Yamaha => Topic started by: DJRacing on April 24, 2010, 10:13:49 pm
-
Aircooled and take a look at that......
(http://i45.photobucket.com/albums/f65/djracingyz/JohnnyOld2010236.jpg)
(http://i45.photobucket.com/albums/f65/djracingyz/JohnnyOld2010237.jpg)
(http://i45.photobucket.com/albums/f65/djracingyz/JohnnyOld2010241.jpg)
-
(http://i45.photobucket.com/albums/f65/djracingyz/JohnnyOld2010249.jpg)
-
(http://i45.photobucket.com/albums/f65/djracingyz/JohnnyOld2010238.jpg)
(http://i45.photobucket.com/albums/f65/djracingyz/JohnnyOld2010239.jpg)
(http://i45.photobucket.com/albums/f65/djracingyz/JohnnyOld2010242.jpg)
-
(http://i45.photobucket.com/albums/f65/djracingyz/JohnnyOld2010240.jpg)
(http://i45.photobucket.com/albums/f65/djracingyz/JohnnyOld2010244.jpg)
-
Didnt i notice that bikein the other post , the johnny old one >. so it obviously ridden still ... nice bit of work that one
-
What's the year of the very tricksta Yammie,thanks,,,only a young fella ridin it 8)
-
Being dirty makes it even more impressive!
-
What's the alloy gizmo stuck to the barrel? Nice little bike that.
-
What's the alloy gizmo stuck to the barrel? Nice little bike that.
That`s the cover over the powervalve arm, very rare bit of gear. Would like to know more about that bike. Peter.
-
Is it a real works bike or something someone made up (replica)?
-
The bike is a 250 and the rider made it himself. Aircooled, powervalved, Ali tank, Titanuim parts everywhere. This is one seriously cool bike and yes he races it. Isnt that what VMX is all about.
-
The bike is a 250 and the rider made it himself. Aircooled, powervalved, Ali tank, Titanuim parts everywhere. This is one seriously cool bike and yes he races it. Isnt that what VMX is all about.
Is there any chance on getting some history on this bike, as in who made it, some more photos ? It is a work of art and a huge credit to who made it and owns it.
Looking at the barrel it looks re-made as the KJR initials are cast into it as well, billet kickstarter, billet footpeg mount it all makes the mouth water. I`m jealous big time. Peter.
-
But is it Evo legal according to our rules? I have my opinion but I openly admit that I'm not fully up to speed with Evo era Yamahas...I don't even know what model the bike started life as and just what its trying to emulate.
I'm interested to see what others think.
-
Now dont get all anal about the rules guys, its one mans dream of a very cool bike, so he made it himself and he races it here in kiwiland.
-
I'd just like to know what it is and what he's done. Asking whether it's legal by our rules is a legit question I reckon. I've got no problems with him building his dream bike and his extraordinary workmanship. I genuinely would like to know what's in and what's out for thast model, whatever it may be.
-
The bike is a highly modified YZ250G.
No it is not legal by Australian rules because of the rule 18.6.0.1 and under rule 18.6.0.3 it would possilby be to hard to prove that it is a replica of an OW Yamaha.
Rule 18.6.0.1 is a tough rule though, when a bike is manufactured without a spocket cover on the motor and you have to add one ;)
-
Wow, what an awesome bit of gear. I'd love to hear some more info about it DJ. Is it based on a factory bike or prototype? or just what the guy would have liked his works bike to be. The workmanship on it looks unbelievable, some serious hours in it i'd imagine.
Tell him not to scratch it too much until VMX mag have done a feature on it.
I reckon rules only come into it if you're racing for trophies. Whether it is legal at a champonship though is a legitimate question I suppose.
In a similar vein, I was talking to some guys at the track the other day about hand/thumb operated rear brakes. There was a version on New Inventors a little while back, and Mick Doohan famously started using one after his leg was mangled. Just wondered whether if you rigged something up yourself, there'd be any sort of problem, given that it is in no way standard.
-
In a similar vein, I was talking to some guys at the track the other day about hand/thumb operated rear brakes.
http://www.clake.com.au/ (http://www.clake.com.au/)
If that is all made by the owner, then someone has access to some very state of the art pattern making, casting and machining equipment. Look at the quality of the clutch cover, unless it is a late model water cooled bottom end that has been converted to be water cooled. Very very nice, with the barrell being the least of the mods and work.
-
unfortunately at $1200 bucks it's probably worth more than the bike ;D and it doesn't work on drum brakes.
Sorry for the hijack DJ, maybe I should move this on to another thread.
-
The guy who made and races the bike just looked at as many photos of OW's he could and made his own. He is very skilled at what he does as you can see, he is a private kind of guy and doesnt like to much fuss so I/we should be just happy to see the bike and how it goes.
Engine cases and billet ali stator cover were sandblasted with 80grit to get the look of sandcasting and I believe he made his own side number boards. As for alot of what he has done I'm not sure since he was just about to go out in his next race I didnt get much of a chance to talk with him. But I thought a few guys on here would like to see the pictures I took of his bike.
I reckon rules only come into it if you're racing for trophies. Whether it is legal at a champonship though is a legitimate question I suppose.
Ok if you must know, then YES it is eligible to race for and win trophies, championships and any other prizes that are put up in claases like Pre81, Evo, Twinshock 250.
-
Is their actually a power valve lurking in that cylinder, or is it just a dummy cover ??
Either way what great bike...and a great track.
Any chance of a heads up when it rolls around next year.
-
The powervalve is real and works
-
That would be the same chap with the trick '74 CZ with all the billet stuff on it?
-
It is Brad and as you know he does a nice job.
-
Didnt he cast his own hubs up in magnesium DJ?
-
yep ;) A very talented man and a bloody nice bloke to :) But best of all he races the bike and generally puts it at the pointy end of the field :)
The Craftmanship that has gone into the build is amazing , it really is a very cool Bike 8)
-
There should be a master engineers class in oz for that type of kit, I am very impressed with this guys style of wizardry. Don't you think the initials are a nice touch, I would be proud to put my name to work like that too!
-
He could sell those right hand footpeg brackets commercially and make a packet 8) The shaft wears and makes the brake lever floppier than a ...... very floppy thing ::)
-
Very nice work for sure ;)the same guys cz was in one of the vmx issues done in black and all made hubs and frame very nice ::)
another smart kiwi bro 8)
-
I am working on a fix for that floppy syndrome you mention 'H, I figure on turning down the shaft until it is round again and making a press on sleeve to restore the dimensions. Mind you, if these mounts were made available there would certainly be a lot of happy F,G,H & J owners. Just out of interest, I have noticed a minor evolution in the design for the 4 consecutive models - it goes like this.
250 F & G same part
H & J interchangeable with predecessors but lack the bracing across the top (different peg bracket made cheaper and lighter)
J is a dead ringer for the H but has a hole drilled through the back of the peg bracket to save F.A weight
I reckon with the intro of watercooling and the added weight associated with that design, Yamaha engineers must have offered bonuses to any staff who could suggest ideas to save a gram without going exotic with the materials.
-
How many more Burt Munroe's and John Britten's are there in N.Z. ???
-
How many more Burt Munroe's and John Britten's are there in N.Z. ???
I know at least one Kiwi that is smarter than all of them put together.
DJ that sure is some nice work on the power valve, do you know if the governer was off the shelf Yamaha parts or custom built?
-
Lozza, I believe it was custom built and the first attempt needed a little shaving.