OzVMX Forum

Marque Remarks => Suzuki => Topic started by: ranchak on April 18, 2010, 04:23:15 pm

Title: RM370A,B and RM400C Connecting Rod
Post by: ranchak on April 18, 2010, 04:23:15 pm

Hi Guys, I'm looking to do a reproduction connecting rod kit for the RM370A,B and RM400C. Not too sure, but I think a rod kit will be around $175. A kit will be connecting rod, crank pin, crank washers, crank and wrist pin bearings. This WILL NOT be cheap Chinese junk, this is high quality Japanese products. Any interests or thoughts?


Ron Anchak
www.anchakandsons.com

Title: Re: RM370A,B and RM400C Connecting Rod
Post by: oldfart on December 31, 2012, 06:00:47 pm

bump

Title: Re: RM370A,B and RM400C Connecting Rod
Post by: JohnnyO on December 31, 2012, 06:51:30 pm

Yeah i'd take one if he ended up going ahead with it.

Title: Re: RM370A,B and RM400C Connecting Rod
Post by: bigk on January 01, 2013, 09:02:22 am

I used a YZ465 rod in the last one I did.
K

Title: Re: RM370A,B and RM400C Connecting Rod
Post by: TT5 Matt on January 03, 2013, 10:29:11 pm

what mods did you have to do to use the yz465 rod big k?

Title: Re: RM370A,B and RM400C Connecting Rod
Post by: bigk on January 03, 2013, 10:33:00 pm

From memory, stuff all if any. Used a genuine Suzuki pin & bigend which are still available, may have had to something with the thrust washers, not sure now though. The YZ rod was available from Yamaha at the time (about 4 years ago). Was a very easy interchange.
K