OzVMX Forum
Clubroom => General Discussion => Topic started by: mx250 on April 15, 2010, 07:46:10 am
-
There was a thread on work stands a little while ago (and I can't find it ::)).
Here's another contribution from Scott of VMX plastics blog.....
http://2.bp.blogspot.com/_3DIjvmd2m5o/Ri3nWau1FrI/AAAAAAAAAP0/DNS38W-GZao/s1600-h/IMG_1100.JPG
Very model specific and rather involved but I think worth while for a resto.
-
Neat unit, but you still need to lift the bike on to it., l would like to buy a hydrolic bike stand about 450 dollars, you see them in just bikes magazine.
-
There was a thread on work stands a little while ago (and I can't find it ::)).
Very model specific and rather involved but I think worth while for a resto.
Bloody Mainline has been deleting threads again >:( ;D
I like that - as you say resto specific, but a great idea 8)
-
back in the old days before i made a lift up bench i use to hang the bike from the rafters using 2 or 4 tie downs,you just work on one end at a time to get it up in the air and cheep too ;) ;D
-
Model Engineers Workshop had plans for a works stand there was a 500kg floorjack a formply/mdf base and about $50 worth of RHS. My mate made one and it works a treat. I'll see if I an get the plans off him and post them up
-
Well done Lozza 8)