OzVMX Forum

Clubroom => General Discussion => Topic started by: number8 on March 31, 2010, 06:05:15 pm

Title: Re Platting Spokes,
Post by: number8 on March 31, 2010, 06:05:15 pm

Who's the best people to go to for re platting spokes & nipples,preferably in Brisbane and surrounds

#8

Title: Re: Re Platting Spokes,
Post by: holeshot buddy on March 31, 2010, 10:35:01 pm

gary i think there is a plating place in kunda park
check the phone directory

cheers rusty ;D

Title: Re: Re Platting Spokes,
Post by: STW996 on April 01, 2010, 06:50:25 am

Custom Coatings at Brendale.

See Ralph, can do all bolts, nuts, springs and spokes from bike for around 50 bucks, make sure you wire nipples on a piece of mig wire as they can be easily lost.

Note, don't need to pre-clean just take down the way they are.

Shane

Title: Re: Re Platting Spokes,
Post by: number8 on April 01, 2010, 03:56:52 pm

Quote from: STW996 on April 01, 2010, 06:50:25 am

Custom Coatings at Brendale.

See Ralph, can do all bolts, nuts, springs and spokes from bike for around 50 bucks, make sure you wire nipples on a piece of mig wire as they can be easily lost.

Note, don't need to pre-clean just take down the way they are.

Shane

Is that Allzinc at Brendale,I was given there name today,

#8

Title: Re: Re Platting Spokes,
Post by: STW996 on April 01, 2010, 04:57:49 pm

No Custom Coatings in Leonard Crst Brendale.

Much better than All Zinc

Title: Re: Re Platting Spokes,
Post by: mainline on April 09, 2010, 11:29:23 pm

picked up my box of bits from Custom Coatings yesterday, very happy indeed. Thanks for the info.

Title: Re: Re Platting Spokes,
Post by: STW996 on April 10, 2010, 05:49:24 am

Good stuff Mainline, Heading that way myself next week.

Shane

Title: Re: Re Platting Spokes,
Post by: YZ250H on April 10, 2010, 08:00:08 am

Quote from: STW996 on April 01, 2010, 06:50:25 am

Custom Coatings at Brendale.

Note, don't need to pre-clean just take down the way they are.

Shane

Shane,

How dirty can they be - like straight off the bike or do you recommend washing / degreasing before taking it there ?