OzVMX Forum

Marketplace => Wanted => Topic started by: Doc on December 06, 2007, 08:31:19 am

Title: RM125 S or M barrel - TM125 or RM125 S/M Stator assy
Post by: Doc on December 06, 2007, 08:31:19 am

I'm on the hunt for an RM125S or RM125M barrel for a ride bike. Bore size and overall external condition is not critical so long as the bore's not maxed out. Have seen them on eBay US but I'd prefer something local as I've not had a great run with egay of late. Also hunting a stator assy for a TM125/RM125M-S and the illusive magneto cover for the same models ::) Price negotiable for the right bits  :) email me at [email protected] or ph. (07) 33146481 leave a message and I'll phone back. Thanks

Title: Re: RM125 S or M barrel - TM125 or RM125 S/M Stator assy
Post by: cyclegod on December 06, 2007, 08:50:21 am

Here ya go Doc, please note that I am bidding on some stuff here too (oil tank, swingarm, airbox, muffler, sidestand) and would not like to be outbid.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=012&sspagename=STRK%3AMEBI%3AIT&viewitem=&item=220178483391&rd=1

http://cgi.ebay.com/ebaymotors/1975-SUZUKI-TM-100-STATER-AHRMA_W0QQcmdZViewItemQQcategoryZ35581QQihZ012QQitemZ220178472010QQrdZ1QQsspagenameZWDVW

Title: Re: RM125 S or M barrel - TM125 or RM125 S/M Stator assy
Post by: cyclegod on December 06, 2007, 08:57:31 am

Oh and I sold 2 barrels to umm... I think it was dodgee in NZ or clarkey. He might be willing to part with one they were both at 0.5mm over.

Title: Re: RM125 S or M barrel - TM125 or RM125 S/M Stator assy
Post by: cyclegod on December 06, 2007, 01:35:15 pm

Barrel here...
http://cgi.ebay.com/ebaymotors/1975-Suzuki-RM125-M-RM125m-Cylinder-56-50mm_W0QQcmdZViewItemQQcategoryZ35595QQihZ004QQitemZ140186816331QQrdZ1QQsspagenameZWDVW

Title: Re: RM125 S or M barrel - TM125 or RM125 S/M Stator assy
Post by: Doc on December 06, 2007, 04:50:19 pm

Thanks heaps Cyclegod..spoke to Dodgee early this morning, that barrel on ebay is already in someone elses sights so I'll pass on that one also as I don't bid against people I know. I'd preferably like to source a barrel locally but I'll have a stab at that stator regardless. Thanks again, I'll keep my ears to the ground and something will turn up sooner or later ;)

Title: Re: RM125 S or M barrel - TM125 or RM125 S/M Stator assy
Post by: oldfart on December 06, 2007, 05:40:39 pm

Doc
       Next time you down my neck of the woods chasing snakes n spiders call into Moss St Wreckers  ;)

Title: Re: RM125 S or M barrel - TM125 or RM125 S/M Stator assy
Post by: Doc on December 06, 2007, 05:47:52 pm

mmmm..sounds like you know something oldfart  ;) is it a maybe definate? I normally do Springwood on a Sunday morning as there is zilch traffic...I hate traffic but for an RM barrel I could surely fight my way there ::)

Title: Re: RM125 S or M barrel - TM125 or RM125 S/M Stator assy
Post by: oldfart on December 06, 2007, 06:38:38 pm

Ok     Im going past some time in the arvo and will check . Do you have a mobile #
Hey   Wayne you want me to pick up those rings and pistons from old mate in Moss street , as you and Doc are heading  down this way :)

Title: Re: RM125 S or M barrel - TM125 or RM125 S/M Stator assy
Post by: Lozza on December 06, 2007, 06:41:31 pm

Might be able to help you out with an alternative stator/rotor/CDI set up.

Title: Re: RM125 S or M barrel - TM125 or RM125 S/M Stator assy
Post by: Doc on December 06, 2007, 07:45:46 pm

Thanks Lozza..I'll see if I can't get a TM item first but so long as it works how it should then I'd settle for anything  :)

Oldfart, looks like early Sunday the dodgeemeister and myself will be careening down the highway in your direction. Not sure how much time we'll have but I'll let ya know tonight or tomorrow. I don't have a mobile phone by the way..these along with keys and wallet I spent much of my life seaching for..the phone was declared lost after it sunk to the bottom of a pond and it's never been replaced :-[

Title: Re: RM125 S or M barrel - TM125 or RM125 S/M Stator assy
Post by: oldfart on December 07, 2007, 05:33:25 pm

 Oops -  Barrel was wrong as had 4 head studs  :-[

Title: Re: RM125 S or M barrel - TM125 or RM125 S/M Stator assy
Post by: Doc on December 07, 2007, 08:31:26 pm

mmm..so it be a TM barrel I assume Stew..still interested if the price is right so I may just have to give them a call..thanks for asking ;) might seeya sunday..still pending so I can't be more definate sorry  :)

Title: Re: RM125 S or M barrel - TM125 or RM125 S/M Stator assy
Post by: oldfart on December 07, 2007, 11:59:41 pm

I rang Dodgee about the barrel ...He may be able to fill you in on it   ;)

Title: Re: RM125 S or M barrel - TM125 or RM125 S/M Stator assy
Post by: Doc on December 08, 2007, 08:32:46 am

 ;D well it seems like the biggest issue now is a mag cover ;D

Thanks to a couple of very generous forum members namely Donny and Wayne my TM125S Franky will live! (insert sinister laughing here)

 

Title: Re: RM125 S or M barrel - TM125 or RM125 S/M Stator assy
Post by: cyclegod on December 08, 2007, 08:40:30 am

Theres a guy selling TM125 stuff here, might be worth a try...
http://www.vintagemx.us/cgi-bin/swapmeet.cgi