OzVMX Forum
Marketplace => Wanted => Topic started by: TT on March 20, 2010, 06:29:56 pm
-
I'm after a second hand sidecovers and seat or seat cover for this bike as new parts won't fit in with the rest of the bike. :D
-
I feel your pain Tony :(
hence....why on my '78 RS400C cheapo bitsa project (I ditched the RS100 idea :P) I have only this morning generously applied a beaut coat of el'cheapo satin black :o end of problem 8) just need to find me an exhaust, bolt on the airbox and carb, buy a rear sprocket, couple of cables, pair of grips, a few rear spokes, a doc detail and she'll be done 8) Another one Suzuki never made that no one would have wanted ::)
(http://img.villagephotos.com/p/2005-1/923869/rs400c.jpg)
(The guards and covers were rejects, front was chunder white, rear sun bleached red and the covers a yellow spew colour so no good vintage parts have been harmed in this project)
-
I've shelved the idea of turning it into an RS250 for the moment, mainly because of the cost of shipping the bits I need from the U.S.
The bike I have has no L/H sidecover and the R/H one is VERY faded and brittle. So paint won't help me much. :-\
I just want to get it running and looking reasonable before the Harrow vinduro.
-
Tony I will give you one of my 400 seats and a pair of sidecovers they are the same as the 250 to get you out of trouble I have another seat in my roof I'd like to see you make harrow I am hoping to be there thanks Michael. :)
-
When and where is Harrow Vinduro?
-
Great stuff, Frosty! I've sent you a pm on the 'other' site. ;D
The Harrow Vinduro is on the weekend of July 24/25 in Western Victoria at a place called (oddly enough) Harrow. ;)