OzVMX Forum

Marque Remarks => Honda => Topic started by: Rossvickicampbell on March 17, 2010, 07:22:59 pm

Title: Another CR250RD 83 question?
Post by: Rossvickicampbell on March 17, 2010, 07:22:59 pm

Gents - oil leak coming from where the gear shift lever exits the case - no seal?????  What options are there please?  Sorry no seal listed either!

cheers

Rossco

Title: Re: Another CR250RD 83 question?
Post by: suzuki43 on March 17, 2010, 07:43:47 pm

Rossco time to scrap her mate,you should get $10 for it. ;)

Title: Re: Another CR250RD 83 question?
Post by: Hoony on March 17, 2010, 07:56:21 pm

Roscoe are you sure this model has no seal on the gear lever shaft ???

Title: Re: Another CR250RD 83 question?
Post by: 090 on March 17, 2010, 08:25:39 pm

It does for sure.
http://www.cmsnl.com/honda-cr250r-elsinore-1983-us_model7325/partslist/E++03.html (http://www.cmsnl.com/honda-cr250r-elsinore-1983-us_model7325/partslist/E++03.html)
14x28x7

Title: Re: Another CR250RD 83 question?
Post by: Hoony on March 17, 2010, 08:28:09 pm

good stuff Brad.

sounds like a common size ! try a bearing service

Title: Re: Another CR250RD 83 question?
Post by: Rossvickicampbell on March 17, 2010, 09:56:44 pm

nup - Brad - mine doesnt have one and the parts manual here doesn't list one (cant load a picture I am afraid at the moment).

My parts go 11 - spindle complete gearshift, 13 spring gearshift reset, 14 spring gearshift return, 22 circlip external 14mm and 17 washer 7.2mm.  No picture of a seal and there isn't one in the bike?????

???

Rossco

Title: Re: Another CR250RD 83 question?
Post by: Rossvickicampbell on March 17, 2010, 09:57:18 pm

Oh Craig - by the way - bite your bum!!!!   ;D

Title: Re: Another CR250RD 83 question?
Post by: Rossvickicampbell on March 17, 2010, 09:58:37 pm

OOOOps - OK Brad - I owe you a beer - not on the gearshift page!!!  bugger

and thanks

Title: Re: Another CR250RD 83 question?
Post by: Tossa on March 18, 2010, 12:14:39 am

yep you're definitely on form rossco.  hear your weekend was interesting for both bikes

Title: Re: Another CR250RD 83 question?
Post by: Rossvickicampbell on March 18, 2010, 10:49:49 am

Baz - the one thing that was correct is I DIDN"T HAVE ONE!  I am surprised it wasn't absolutely pissing out???

I got what I needed out from the weekend as it was my tuning day.  Had to change the main in the 360 and now get the peg fixed and found shite in the fuel system of the 250 plus another problem to look out so served it's purpose.  Still bloody warm though!!!  How did you go?

Rossco

Title: Re: Another CR250RD 83 question?
Post by: ianscr250 on March 18, 2010, 02:09:16 pm

mr metric  aka orter agencies in osborne park do after market seals

Title: Re: Another CR250RD 83 question?
Post by: ianscr250 on March 18, 2010, 02:09:54 pm

bugga missed the p porter agencies

Title: Re: Another CR250RD 83 question?
Post by: Tossa on March 18, 2010, 06:02:26 pm

Quote from: Rossvickicampbell on March 18, 2010, 10:49:49 am

Baz - the one thing that was correct is I DIDN"T HAVE ONE!  I am surprised it wasn't absolutely pissing out???

I got what I needed out from the weekend as it was my tuning day.  Had to change the main in the 360 and now get the peg fixed and found shite in the fuel system of the 250 plus another problem to look out so served it's purpose.  Still bloody warm though!!!  How did you go?

Rossco

The RM is sorted frightened the living daylights out of me, though none of the photo's show it.  It kinda like launched into space at one point, didn't think i was coming down.  Will ride the yammie 360 at collie on 11th Apr.  i'll see you for a beer night before Manji