OzVMX Forum

Marque Remarks => Yamaha => Topic started by: GMC on March 15, 2010, 09:22:13 pm

Title: IT Guru's please
Post by: GMC on March 15, 2010, 09:22:13 pm

Doing some clean up work on an IT 175 frame and I'm not sure about this bracket.
It looks to be the area of where the muffler mount should be but it just doesn't look right.
I'm not sure if it's completely wrong or just half missing.

Can anyone supply a close up of this l/h rear part of the frame please?

Either on here or e-mail to [email protected]

(http://i15.photobucket.com/albums/a393/gmcloa/Unifilter-047.jpg)

Title: Re: IT Guru's please
Post by: Graeme M on March 16, 2010, 06:40:19 am

Geoff what year model is that? If it's a G/H I can get a photo for you. I suspect not as the muffler mount is on the right on the G. On my G frame, that mount in your pic is for the left sidecover.

Title: Re: IT Guru's please
Post by: mx250 on March 16, 2010, 07:30:16 am

Was it a G - does this help......

(http://i323.photobucket.com/albums/nn458/mx250syd/OzVMX/partimagegifx-3.gif)

Title: Re: IT Guru's please
Post by: Nathan S on March 16, 2010, 07:50:36 am

Bolt-on tool pack holder sugggests pre-G.

Pic to be sent later this morning...

Title: Re: IT Guru's please
Post by: GMC on March 17, 2010, 08:07:00 pm

Thanks Guy's and thanks Nathan for the photo.
I assume the lower hole has a captive 8mm nut & the upper hole is "weight saving" ??
 

Title: Re: IT Guru's please
Post by: Nathan S on March 17, 2010, 09:44:44 pm

Yes.