OzVMX Forum

Marketplace => For Sale => Topic started by: DR on March 15, 2010, 06:48:40 pm

Title: KDX250C forks triples and wheel for sale or swap
Post by: DR on March 15, 2010, 06:48:40 pm

Complete 38mm front end from an '84 KDX250C (less brake actuating arm) very useable but not show quality obviously. Only a few small nics in the chrome sliders, the lowers were nicely polished with very little rash. They've been sitting unattended for a long time but wouldn't take much more than a quick polish to have them nice again. Spokes are rusty and forks would need a service/oil 'at least'. All the bearings and brakes are good.

Asking $85 as it sits or I'd gladly swap for a decent '77/'78 PE250/RM250/370 steel 'box section' swingarm or RM370A/B/400C exhaust. Cheers

Located Brisbane 5 min. from airport.

(http://pue3uw.bay.livefilestore.com/y1pgyoqRLHPVwMVYHKlHXqwleoyhgPhcVdLpUylNZIUGAnK032Zep0ALSltIMA7Uz7HRgRtWCWUQrEHawh8EiPUFy-tQHOxSupD/kdx%20forks%20002.jpg)

Title: Re: KDX250C forks triples and wheel for sale or swap
Post by: Nathan S on March 16, 2010, 07:49:30 am

If the brake is larger than the KDX200's, then consider it sold.

Will PM you later this morning, when I have time.

Title: Re: KDX250C forks triples and wheel for sale or swap
Post by: DR on March 16, 2010, 08:27:20 am

Brake drum measures 140mm Nathan. Front rim has an area of corrosion on the inside where it must have sat with water in a flat tyre. Externally it looks fine, spokes are tight and it runs true but be aware the rim while useable wouldn't be worth re-spoking ;)

Title: Re: KDX250C forks triples and wheel for sale or swap
Post by: DR on March 28, 2010, 04:17:47 pm

The matching KDX250 rear wheel is now also included ;)

Title: Re: KDX250C forks triples and wheel for sale or swap
Post by: Bamford#69 on May 05, 2010, 01:14:15 pm

HI,
Give me a call on 0418 729 425, if this is still available
cheers
Michael