OzVMX Forum
Marketplace => For Sale => Topic started by: vandy010 on March 08, 2010, 11:58:42 am
-
I've been procrastinating on doing this for a while and as i'm one of those people that hasn't figured out how to post up photo's yet, just PM me your email and a request of what your interested in and i'll email photo's to you.
most of this stuff is in decent shape but it's more of a cleanout rather than a profit making situation.
all offers considered and it's all located in Brisbane P/C 4074
can deliver to BMCC meetings or to CD7 and your welcome to pick it up too.
Honda:-
XL 23'' front wheelgone to a good home
XL250 engine {82~ish ?} engine #L250SE-5311216gone to a good home
XL/XR workshop maual 250/350~ 78/95
200R 84/85. 250L91/96
Kawasaki:-
KLX250 framegone
forks-no capsgone
assorted engine covers/rubbersbits SOLD
fr & rear hubsgone
spokes, rear, new SOLD
1 rear shock onlySOLD
Yamaha:-
DT/MX360 pre~75 project {chassis in pieces motor complete}SOLD
XT600 Tenere 84 parts{frame tank seat plastics} turn your XT into a Tenere!SOLD
YZ125 89 project
MX250 73 race ready {coming soon}
DT175 barrel/head 74
Husaberg:-
FE501 2002 {coming soon}
PH 07~37156508 or 0403~773552 daytime prefered.
cheers! :)
-
pm sent
-
P.m sent Re; XT600 parts :) Darcy
-
23" FRONT WHEEL HONDA WERE ON A WINNER THERE ;D ;D ::)
-
Pm me about DT/MX360 pre~75 project {chassis in pieces motor complete}
Thanks
Mitch
-
thanks for interest so far fella's.
it's midnight monday now,
i'll get some photo's taken and email them to the guys that have sent me thier emails so far.
Mitch,
{and other interested parties}
DT/MX360 is supposed "good" DT360a engine {as i was told when i aquired it}, good frame, MX tank/seat/sidepanels, spare DT barrel, MX head, old wheels & old suspension, no pipe or airbox
and a box of assorted spares full of "the little stuff" {pegs,brake arms etc}
23" FRONT WHEEL HONDA WERE ON A WINNER THERE ;D ;D ::)
you know you want it Rusty ::)
some of the PM's i've recieved have no forwarding email address for photo's.
if your keen guys, to give me your email address is the best bet for a pic.
my apology for my lack of computer savvy.
cheers,
Mick.
-
emails with pics sent to a heap of guys.
sorry Mitch, i don't have an email address for you.
messege it to me and i'll send some pics.
--------------------------------------------------
the two guys fighting over the new KLX rear spokes will need to duke it out between them as it's hard to tell who was first.{Nathan & Tony}
a heap of the other KLX/Honda/small stuff could be free too fella's.
you just need to sort out how your going to pick it up.
cheers,
Mick.
-
the two guys fighting over the new KLX rear spokes will need to duke it out between them as it's hard to tell who was first.{Nathan & Tony}
4:58pm beats 6:45ish... ;D
I'll call you both later this arvo/tonight.
-
Vandy's inciting violence here...... it's gonna turn into some sort of soccer houliganisum....... geez I hoped I spelt that right!!...... check it for me Dot please. Bloody Dutchman lowering the standard of our forum!!!! ;D
-
i was wondering when you'd drop in Davey.
antihouliganizationalismistically inclined folk don't ever incite violence Davey.
thought you would of known that... :D
-
I cant even say that ???
-
Vandy pics on the MX250. PM.
also proves you cant give away honda stuff.
-
MX250 pics emailed Freaky.
feel free to post them here if you like as i'm yet to get it sorted.
cheers...also proves you cant give away honda stuff.
the front wheel is free!
the motor i reckon a $50 would do it
and the manual $10 plus postage and i'm happy.
sounds like a givaway to me...
-
(http://i33.photobucket.com/albums/d88/munchboxlive/Vandys73MX250.jpg)
Had a similar problem on my old MX25a with it thowing second , turned out there was a chip in the shift drum, so it will need to be replaced and it had rounded the dog on second so that had to be changed as well.
cheers Kerry
-
thanks for whacking that up Freaky.
this is my MX250a thats for sale & this is my brother on it at the conondale Nats.
the bike runs crisp as with new bearing seals bore piston crank rod etc but has the problem of jumping into neutral when downshifting from 3rd to 2nd only. all other gear functions work perfectly.
hence my comment of "for sale but comming soon"
if anyones keen i'll sell it as is but should they want the gearbox issue fixed they'll need to wait a while and the sale price would be higher accordingly.
the rear shocks are back to the std thermal flows and not what you see in this picture.
P.M. me if your keen guys.
bikes in Brisbane.
07~37156508
0403~773552
Mick.
-
Ahhh... so that's what you were trying to do by giving me a ride - sell it to me :P
It is a sweet little bike and if the missus hadn't said "11 bikes is enough" it'd be sold ;D ;D. That extra neutral thing was a tad annoying, but easily sorted I imagine. Goes very nicely and was HEAPS of fun to ride.
-
You must be close to my work Vandy.
You can get the dogs cut back and rehardened-don't throw those gears away.
Mine always jumped out of 3rd and I used to wait weeks for Yamaha NZ to get them in for me. I was mad as hell when I found out I could have got them repaired.
-
I got a set you can repair EML, what do they charge ? of is it cheaper to get new ones off the bay ?
-
You'll need some-one with a milling machine and then harden them again.
Most modern engineering shops shpuld do it or know some-one that can.
-
ok.... that just sounds expensive then.
-
I don't know what the new ones cost but back in the day I had to wait weeks sometimes to get them.
I guess if they are no longer stocked it would be the best option or if you know someone with the gear to do the repairs.
-
gears are in plentifull supply on ebay.
i've already spoken with a guy that can recut gear dogs and i think it's around $70~ish per dog/gear group.
ebay looks pretty cheap by comparison.
anyway,
who's gonna take some stuff out of my shed?
-
Now I'll have to go back to the top and see what was on the list.
How much for the 23'' fr wheel/Udy had one on the DR500 sidecar to make it steer.
-
thanks for whacking that up Freaky.
this is my MX250a thats for sale & this is my brother on it at the conondale Nats.
the bike runs crisp as with new bearing seals bore piston crank rod etc but has the problem of jumping into neutral when downshifting from 3rd to 2nd only. all other gear functions work perfectly.
Hey vandy my MX250A had the same problem, we found the end of the selector had broken off
Barry
-
thanks Barry, it all helps.
How much for the 23'' fr wheel/Udy had one on the DR500 sidecar to make it steer.
totally free!
would you like me to bring it along on sunday Vaughn?
-
Sure, sundays fine.
-
a few bit 'n' bobs have found thier way out of the shed and thanks to the guys that have shown interest and taken stuff.
a few things still need to find a good home though.
for those people that have expressed interest in the MX250.
i took it to our BMCC meeting on sunday,
i advertised it for sale, then took it out in the last 2 races of the day.
a 2nd place, followed by a 1st,
in it's "for sale" condition.
the bike is the goods.
i'll give this thread another week and then delete it.
-
am interested in mx 250 vandy, please pm me price, as is, cheers