OzVMX Forum

Marque Remarks => Suzuki => Topic started by: ranchak on February 27, 2010, 05:45:34 am

Title: PE400 1mm Oversize Piston Kits
Post by: ranchak on February 27, 2010, 05:45:34 am

I have the first run of PE400 piston kits in stock. These are a forged piston. A piston kit runs $199.99. Included in the kit is piston, rings, circlips,
wristpin, wristpin bearing and spacers. I have also added a gasket kit for
$69.95 and a clutch cover screw kit for $16.95. I also have gasket kits and screw kits
available for other model PEs. I will be adding a complete seal kit soon. If
there is interest I will add other fastener kits, fender, side panel, shock,
etc. Any suggestions? Thanks, Ron

Title: Re: PE400 1mm Oversize Piston Kits
Post by: Freakshow on June 24, 2010, 02:46:10 pm

This is the Hot Rods 650 Sea Doo Rod kit that is used to replace the Discontinued rod from Suzuki. A very helpful fellow on the Yahoo Group PEmotorcycles figured out that this rod along with 4 thrust washers will replace the rod that is no longer available from Suzuki. We always try to supply OEM replacement parts when available, but this is a great way to get your PE400 back breathing fire again. This kit includes:

Rod

Piston Pin Bearing

Crank Rod Bearing

Crank Pin (Not used)

2 Large Thrust Washers (one used on each side of the rod)

4 Small Thrust Washers (two used on each side of the rod)

$120 bucks.

Title: Re: PE400 1mm Oversize Piston Kits
Post by: Freakshow on March 15, 2011, 11:45:51 am

Can anyone update this ? i have no idea where i got this info from , but have another guy after a rud kit for a PE400 1980 model?  what are you people using and were can i get one.

Title: Re: PE400 1mm Oversize Piston Kits
Post by: LWC82PE on March 15, 2011, 12:54:14 pm

PE 400 rod and piston kits available here at Rons site

http://www.anchakandsons.com/info.html

We need stickys on this forum so common freauently asked for info is not burried!

Title: Re: PE400 1mm Oversize Piston Kits
Post by: oldfart on March 15, 2011, 03:56:48 pm

freaky .....all parts are available in OZ . just use a Seadoo  " hot rod "  part 8117   shim the bottom so it is crank guide.
Serco have the specs ....as I have passed on the relevant imfo.

Title: Re: PE400 1mm Oversize Piston Kits
Post by: ranchak on March 16, 2011, 05:08:22 pm

Quote from: Freakshow on June 24, 2010, 02:46:10 pm

This is the Hot Rods 650 Sea Doo Rod kit that is used to replace the Discontinued rod from Suzuki. A very helpful fellow on the Yahoo Group PEmotorcycles figured out that this rod along with 4 thrust washers will replace the rod that is no longer available from Suzuki. We always try to supply OEM replacement parts when available, but this is a great way to get your PE400 back breathing fire again. This kit includes:

Rod

Piston Pin Bearing

Crank Rod Bearing

Crank Pin (Not used)

2 Large Thrust Washers (one used on each side of the rod)

4 Small Thrust Washers (two used on each side of the rod)

$120 bucks.

The rod kit now comes with the OEM Suzuki crank pin

Title: Re: PE400 1mm Oversize Piston Kits
Post by: Le Canari on March 16, 2011, 11:31:43 pm

Quote from: ranchak on March 16, 2011, 05:08:22 pm

Quote from: Freakshow on June 24, 2010, 02:46:10 pm

This is the Hot Rods 650 Sea Doo Rod kit that is used to replace the Discontinued rod from Suzuki. A very helpful fellow on the Yahoo Group PEmotorcycles figured out that this rod along with 4 thrust washers will replace the rod that is no longer available from Suzuki. We always try to supply OEM replacement parts when available, but this is a great way to get your PE400 back breathing fire again. This kit includes:

Rod

Piston Pin Bearing

Crank Rod Bearing

Crank Pin (Not used)

2 Large Thrust Washers (one used on each side of the rod)

4 Small Thrust Washers (two used on each side of the rod)

$120 bucks.

The rod kit now comes with the OEM Suzuki crank pin

yes  i buy  one  set of cranck rod of pe400 to ron  and it is perfect
fabrice

Title: Re: PE400 1mm Oversize Piston Kits
Post by: ranchak on March 17, 2011, 03:08:55 pm

Merci Beaucoup mon ami!

Title: Re: PE400 1mm Oversize Piston Kits
Post by: Le Canari on March 21, 2011, 10:11:20 am

thank you ron  for french language :P 

Title: Re: PE400 1mm Oversize Piston Kits
Post by: ranchak on March 21, 2011, 04:06:02 pm

I don't remember much more from High School