OzVMX Forum

Clubroom => General Discussion => Topic started by: Rossvickicampbell on February 03, 2010, 01:16:59 am

Title: Clutch levers
Post by: Rossvickicampbell on February 03, 2010, 01:16:59 am

Guys - can you give me your opinion on easy pull clutch levers.  Have only tried one cheaper one (as my clutch action is heavy as) and it basically did nothing.  Would like to try something else but don't really fancy $100+ for something that doesn't work.  Any experiences?

ta

Rossco

Title: Re: Clutch levers
Post by: Tossa on February 03, 2010, 01:19:10 am

try some exercise so you grow into a big strong man, then you'll be able to pull anything!!

Title: Re: Clutch levers
Post by: Rossvickicampbell on February 03, 2010, 04:21:14 am

there is another opening there I will leave T?

Title: Re: Clutch levers
Post by: 090 on February 03, 2010, 06:34:58 am

MCS does one LA16LF. It has 3 different cable positions to change the ratio.

http://www.mcsonline.com.au/catalogue/ch_eight.pdf (http://www.mcsonline.com.au/catalogue/ch_eight.pdf)

Scroll down to near the bottom. I use it for my clutch and brake on my Maico.

Title: Re: Clutch levers
Post by: Davey Crocket on February 03, 2010, 08:22:07 am

You can also buy Magura sets from Weekend Warriors for about $60.... real German steel....not Chinese or Tawanise. Rosco, have you extended the arm off the actuator?, thats the trick!

Title: Re: Clutch levers
Post by: Rossvickicampbell on February 03, 2010, 01:13:25 pm

thanks Davey and Brad - don't think I can extend the arm on my 360 as it uses a push lever style setup.  I'll go and have a look at what you have mentioned.

cheers

Rossco