OzVMX Forum
Clubroom => Tech Talk => Topic started by: caps 999 on August 01, 2007, 10:18:22 am
-
i am looking into building a dt1 mxer out of a dt1f i just nedd to know it there were any other differnces between the dt1f and mx other than the 21" front wheel land lighting and if any one has any tips in building one thanks caps 999 8)
-
There were a whole heap GYT bits for the DT1. Don't know how they relate to the "GYT kit" or the 'off the showroom floor' DT2MX, but the listing I've got shows: barrel, head, piston, carb, muffler, front rim and spokes, blanking plugs, etc.
Interestingly, the list for the DT1 GYT bits is much shorter than the list for AT1 and RT1 GYT bits.
-
interesting 8)
-
Go here
http://www.eurospares.com/graphics.htm
about half way down there are several article regarding lightweight Yammies. You should find inspiration and worthwhile info.
Firko should arrive on the scene shortly with tales of the 'DT fom Hell'.
Cheers, Graeme.
-
i posted that link yesterday
-
other differences between the dt1f and mx other than the 21" front wheel land lighting and if any one has any tips in building one thanks caps 999 8)
The DT1 was a neutral handling pig of a bike that did nothing well where as the DT1MX was a slighly lighter neutral handling pig of a bike that did nothing well but did it making more noise. ;D
-
i really know that ;)
-
have manual ,will sell , DT1-E vs DT1mx. And yes im sick of posting that.