OzVMX Forum

Marque Remarks => Suzuki => Topic started by: oldfart on January 23, 2010, 06:44:03 pm

Title: Rear Brake arm length Rm 125 1980 ( torque link)
Post by: oldfart on January 23, 2010, 06:44:03 pm
As  stated above I need the length from  brake drum arm  to frame bearing centres.

 
Title: Re: Rear Brake arm length Rm 125 1980 ( torque link)
Post by: Noel on January 23, 2010, 07:12:20 pm
With
(tape measure, while in place on bike, ie not dead accurate,)
530mm

cheers
Noel
Title: Re: Rear Brake arm length Rm 125 1980 ( torque link)
Post by: oldfart on January 23, 2010, 08:04:37 pm
Thank you for your reply Noel.   In comparison  Rm 125 -250 - 400 run the same torque arm length of  530mm centres.
250 & 400 are identical,  but the 125 is narrower at bearing mounts.     Mine must have a 250/400 arm with extra washers either side of bearing to make up difference which now makes sense.