OzVMX Forum
Clubroom => Bike Talk => Topic started by: Colin Jay on January 23, 2010, 08:27:22 am
-
I have the front wheel with a twin leading shoe brake from a 1982 Honda XL500RC, that I want to use in one of my bikes. I have been told by my local dealer that the brake shoes and brake cable are no longer available through Honda for this model, and that the brake shoes are not listed in any of the aftermarket catalogues.
Even though I worked for a Honda dealer during the early 80's, I can't remember if the TLS brake on the XL500RC was the same as that on some of the MX models. Does anyone know of any other Honda models that used the same 130mm front hub and TLS brake assy?
CJ
-
if you go to the EBC and SBS websites and look through their catalogues you will find sizes of shoes and what shoes are the same as what on other bikes etc. You should find your answers in there. i am pretty sure the shoes would be available from SBS or EBC or Ferodo or Bendix or someone.
I looked in the paper catalogues and
XL500RC is the same as XLR400 and is SBS #2077, size 130 x 25mm
In Bendix is #BA077 , also they say 130 x 25mm
In EBC it is #H332 , also they say 130 x 25mm
Also you can compare honda part numbers on www.cmsnl.com This Honda cross reference programe might be handy for you too http://www.zedder.com/msg16.htm
If you cant find shoes there is a place in Adelaide i could recommend to re fit new linings to old shoes for about $40
also the 81-83 XR250, 81-82 XR500, 81-82 CR450/480 and 81-82 CR250 have a 130mm TLS brake aswell but the shoes are slightly different.
part number for those is....
SBS 2030, 130 X 25mm
EBC H327, 130 X 30mm - yes this doesnt agree with what SBS say
Bendix BA030, 130 X 25mm
also
83 CR480/CR250 is EBC H328, 130 X 30
not listed in Bendix or SBS