OzVMX Forum

Marque Remarks => Spaniards (Bultaco, Ossa, Montesa etc) => Topic started by: YUMASTEPSIDE on January 18, 2010, 08:13:22 am

Title: H6 Questions
Post by: YUMASTEPSIDE on January 18, 2010, 08:13:22 am

Anyone running a 360 in vinduro's??..........What gearing are you using and where can I get some of those f$#@ing rubber band things that they use to hold everything on with  ??? ??? ???

               Roger

Title: Re: H6 Questions
Post by: hitatreeonce on January 18, 2010, 08:58:45 pm

I have one, mine still had them all on, but you could try rocky mountian montesa or southwest montesa in the states they might have them. I took most of them off as they just give me the shits and been racing it vmx for 2 years and nothing has fallen off yet

Title: Re: H6 Questions
Post by: montynut on January 18, 2010, 11:47:34 pm

Both Rocky Montain Montesa and Southwest Montesa have them. Bultaco Parts Australia also keep them as far as I know. There are several different lengths although I think the H6 has all the same size. They are used excessively on the H6 & H7 bikes for some reason. My H7 has the seat, fuel tank, air filter element and centre stand all held in place with them, 7 in all!

Title: Re: H6 Questions
Post by: YUMASTEPSIDE on January 19, 2010, 07:05:22 am

..........yeah, the worst thing is the centre stand, it scares the shit out of me thinking the only thing holding that great big thing up is only a rubber band  :o :o :o

               Roger

Title: Re: H6 Questions
Post by: All Things 414 on January 19, 2010, 07:10:37 am

Yes. I think I'll be taking mine off for any serious riding.  :P

Title: Re: H6 Questions
Post by: hitatreeonce on January 19, 2010, 09:21:46 pm

I just use the center stand in the work shop its no drama to remove it, change the split pin to an r clip and its a 2 minute job

Title: Re: H6 Questions
Post by: cappra on February 21, 2010, 06:14:54 pm

Special for my Australian customers only. 7320.204 rubber strap used on
the Enduro's mxer's and Cota's.  $10 ea. (normal price is $19 ea.)  Stock up!
 
                                                          Cheers, Jared
                                                          Southwest Montesa

Title: Re: H6 Questions
Post by: hitatreeonce on February 21, 2010, 09:32:05 pm

Off subject but Jared do you have any specs for a round slide mukini for a cappra gp250?

Title: Re: H6 Questions
Post by: cappra on February 22, 2010, 03:39:11 am

Baseline jetting for the 34mm Mikuni.
Main jet-250
pilot jet-35
needle-6FJ6
needle jet-159Q6
2.5 slide (stock)
This setup works well with the only possible changes in the main and pilot,
depending on the individual bike.

                                                                         Jared