OzVMX Forum

Clubroom => Tech Talk => Topic started by: Power Stand on January 15, 2010, 03:55:10 pm

Title: TM125 Vs TF125 cases
Post by: Power Stand on January 15, 2010, 03:55:10 pm

Advice needed?

Are the crank cases off a TF125 the same as a TM125? Got a friend that’s restoring a TM125 and he heard that the cases are compatible; the main bearings slipped/ fell out the TM.  I guess date ranges may be a factor.

Title: Re: TM125 Vs TF125 cases
Post by: cyclegod on January 15, 2010, 05:16:23 pm

Quote from: Power Stand on January 15, 2010, 03:55:10 pm

Advice needed?

Are the crank cases off a TF125 the same as a TM125? Got a friend that’s restoring a TM125 and he heard that the cases are compatible; the main bearings slipped/ fell out the TM.  I guess date ranges may be a factor.

Not the same at all, the TF is crankcase reed induction. 73-75 TS125, RV125 and TC125 are interchangable with the TM125

Title: Re: TM125 Vs TF125 cases
Post by: LWC82PE on January 15, 2010, 05:32:50 pm

TF125 is the same as TS125 about 78/79 onwards or the ER models.

Title: Re: TM125 Vs TF125 cases
Post by: Power Stand on January 15, 2010, 08:18:44 pm

Thanks guys, will pass on the info. :)

Title: Re: TM125 Vs TF125 cases
Post by: Tim754 on January 19, 2010, 12:35:04 pm

The TC125 cases should be the last used as the High/ Low ratio bits on the left side can be a pain. ;)