OzVMX Forum

Marque Remarks => Honda => Topic started by: Woody on January 13, 2010, 08:27:09 pm

Title: Stock Gearing CR250RD 1983
Post by: Woody on January 13, 2010, 08:27:09 pm

guys
what was the stock sprocket sizes out of the shop and if you have a 250RD, what are you running now for mx?

cheers
Woody

Title: Re: Stock Gearing CR250RD 1983
Post by: Rossvickicampbell on January 13, 2010, 09:30:16 pm

manual says 14/54 - haven't got that far as to check mine out yet or change it?

Rossco

Title: Re: Stock Gearing CR250RD 1983
Post by: Woody on January 13, 2010, 09:54:42 pm

thanks Rossco, my manual is about as clear as mud.

Title: Re: Stock Gearing CR250RD 1983
Post by: Boyracer on January 19, 2010, 10:36:05 pm

14/54 is heaps low, all depends on the track, I would at least go 14/48 and see whether to go a 13 from there.

Title: Re: Stock Gearing CR250RD 1983
Post by: Hoony on January 19, 2010, 10:42:32 pm

14/51 would be a good mix

Title: Re: Stock Gearing CR250RD 1983
Post by: STW996 on January 22, 2010, 07:01:29 am

Bloody Hoony always after extra speed ;D