OzVMX Forum

Marque Remarks => Spaniards (Bultaco, Ossa, Montesa etc) => Topic started by: k2000x on January 02, 2010, 10:22:53 am

Title: montesa rod length and width
Post by: k2000x on January 02, 2010, 10:22:53 am

hi guys has any body measured a montesa 250 rod while having the crank apart.. i would like to know length from centre little end to centre big end and the width and diameter of the little end and width and diameter of big end..

Title: Re: montesa rod length and width
Post by: cappra on January 02, 2010, 05:54:15 pm

Pre 1977 250 dimensions.
Centre to Centre length-116mm
Big end width-17mm
topend width-17mm
Big end bearing-20 x 26 x 17mm
topend bearing-16 x 20 x 17mm
Bigend diameter-26mm
topend diameter-20mm

                                                     Cheers, Jared
                                                     S/W Montesa