OzVMX Forum

Marque Remarks => Suzuki => Topic started by: suzuki27 on December 13, 2009, 12:48:59 pm

Title: PE Barrel Swap
Post by: suzuki27 on December 13, 2009, 12:48:59 pm

Can anyone tell me if the PE250T/X head &  barrel will bolt onto an RM 250 T bottom end. Has anyone done it- or put the RM barrel onto the PE bottom end?. Thanks.

Title: Re: PE Barrel Swap
Post by: oldfart on December 13, 2009, 01:15:09 pm

YES .....discussed at length some time ago.   In my opinion they are the same.
(http://i72.photobucket.com/albums/i180/mutchoo/RmPebarrels-1.jpg)

Title: Re: PE Barrel Swap
Post by: lukeb1961 on December 13, 2009, 01:41:07 pm

Yes, the same in all respects except for slight port height changes.

RM250T 11210-40302
PE250T 11210-40600

Title: Re: PE Barrel Swap
Post by: suzuki27 on December 13, 2009, 01:58:42 pm

Thanks for that . Looking for some more bottom end power and thought I would give it a try- with the PE head as well.

Title: Re: PE Barrel Swap
Post by: LWC82PE on December 13, 2009, 02:08:05 pm

the RM250 T head is the exact same part number as the PE250 T/X/Z head. So you have nothing to gain by fitting a PE head on a RM.

Title: Re: PE Barrel Swap
Post by: oldfart on December 13, 2009, 02:16:37 pm

Power to be made in changing to Rm pipe along with Boysen reeds

Notice barrel on LHS has had some port work at some stage @ reed block & transfer