OzVMX Forum
Marketplace => For Sale => Topic started by: Slakewell on December 06, 2009, 10:35:32 am
-
Shed clean up
After years of collecting many bikes good and bad I have turned over a new leave so to say and have decided to part with all my bikes apart from one. I still have left a number of twin shock YZ 80's C and D models also a XL 75 that can be registered.
2 of the YZ 80's are runners but will need restoring, I would prefer to sell the little YZ's in a job lot. I have a set of 73 CR 250 side covers as well left over. I'm buying 77 KTM 250 stuff if you have any.
Slakewell at bigpond.com
-
Thanks for posting up in here.. 8)
Where are you ?
cheers :)
-
I could be interested in a YZ80D depending on your location and value you put on it.
-
I have some not going YZ D parts like tanks,frames, wheels etc , I also have a YZ A tank that could be cleaned up and used without painting. Mid North NSW. I be happy to sell the whole lot for $1000.00
-
I was looking for a fairly complete D model to restore. What about YZ80C models then, anything mostly complete ready for resto? Im in central west NSW.
-
I have one running D model and one running C model ready to restore why not take both and all the extra bits?
-
Mate if you could see all the junk I have here you'd understand why I don't want it all. How much the running D model? Got any pix?
-
Sent email ;)
-
I got alot of KTM250 stuff but Im not sure of the exact year its 77 or 78 .
If you got some eng & frame #'s I can check.
I also got a complete MC5 .
-
Is the MC5 for sale and are you sure it's MC5 as not many made it to Aussie, plenty of enduro bikes for 77 but MX were rare?
-
Got ya email. Im keen. Sent reply. We'll sort rest via email only.
-
Motomaniac, what KTM parts do you have for sale . Could be interested.
-
Is the MC5 for sale and are you sure it's MC5 as not many made it to Aussie, plenty of enduro bikes for 77 but MX were rare?
The frame serial numbers contain a date code that identifies what month and year the bike was built. These number are stamped on or around by the steering head. In most cases (from 1972+) the first three numbers are the date code. The first number is the year, the next two are the month (eg. 403 = March of 1974).
-
Hi Slakewell
What's the little XL like? Would you have a photo or two and what sort of money are you thinking?
Thanks
Tony
-
When some people have a shed cleanout they have the odd Montesa to part with, anything spanish getting the flick?
Rob
-
Hi Slakewell
What's the little XL like? Would you have a photo or two and what sort of money are you thinking?
Thanks
Tony
The little XL is in bits but complete it was whole and not going when I purchased it, mainly lack of compresion, the engine was just plain worn out nothing more. I paid $350 for it as a project for my son he is now working full time and will not finish it. I'm over having bikes sitting for years waiting there turn that my never come hench selling or giving away sheds full of stuff. Ill post some photo's of everything thats left next week.
-
When some people have a shed cleanout they have the odd Montesa to part with, anything spanish getting the flick?
Rob
There were many Montesa parts including a running VR 250 they have all gone to new homes and hopefully will return to the track.
-
:'(
-
The little XL is in bits but complete it was whole and not going when I purchased it, mainly lack of compresion, the engine was just plain worn out nothing more. I paid $350 for it as a project for my son he is now working full time and will not finish it. I'm over having bikes sitting for years waiting there turn that my never come hench selling or giving away sheds full of stuff. Ill post some photo's of everything thats left next week.
Thanks for that. But I was only interested if it was in good condition and running.
-
Got any YZ or MX Yammie parts hidden in there?, if you find any can you pm me. Cheers John.
-
Motomaniac, what KTM parts do you have for sale . Could be interested.
frame ,motor ,wheels - no plastics ,pipe or suspension.pretyy sure its 77 or 78 250 enduro
eng# 5430004 010, head#5430006-000,barrel elko ez71/5p ???
The other bike is a MC5 - frame 550 04220 its got the red tank with world champoin onot and 2 petcocks. I COULDN'T READ THE ENG # - MAYBE THEY WERE SWAPPED.
-
Hi ,
Im interested in the cr sidecovers could you email me a picture and price please
Cheers
fatboy
[email protected]
-
Motomaniac, what KTM parts do you have for sale . Could be interested.
frame ,motor ,wheels - no plastics ,pipe or suspension.pretyy sure its 77 or 78 250 enduro
eng# 5430004 010, head#5430006-000,barrel elko ez71/5p ???
The other bike is a MC5 - frame 550 04220 its got the red tank with world champoin onot and 2 petcocks. I COULDN'T READ THE ENG # - MAYBE THEY WERE SWAPPED.
Why this may seem a little trivial since you gave us the frame numbers but the information suggest an 80's model? red tank with MC world champs would normally be a 75 again none were imported in 75 into AUS, if it has an orange frame with braced swing arm its probably 78 onwards. I'm no KTM know all so anyone chip in here? A photo of the MC would be great. slakewell at bigpond.com
-
Hi,
I'm after some rust free fork tubes for a YZ80D. Any chance?
Cheers, Chris
-
frame ,motor ,wheels - no plastics ,pipe or suspension.pretyy sure its 77 or 78 250 enduro
eng# 5430004 010, head#5430006-000,barrel elko ez71/5p ???
The other bike is a MC5 - frame 550 04220 its got the red tank with world champoin onot and 2 petcocks. I COULDN'T READ THE ENG # - MAYBE THEY WERE SWAPPED.
[/quote]
Why this may seem a little trivial since you gave us the frame numbers but the information suggest an 80's model? red tank with MC world champs would normally be a 75 again none were imported in 75 into AUS, if it has an orange frame with braced swing arm its probably 78 onwards. I'm no KTM know all so anyone chip in here? A photo of the MC would be great. slakewell at bigpond.com
[/quote]
The numbers by this site are consistant with an MC5
http://www.pentonpartsusa.com/10%20B%20Technical%20KTM.htm
Neither are 80's .I had a 1980 420 backin the day .they have plastic tanks and alloy arms and marzocchis forks.
The MC5 has fibreglass tanks , steel arms etc.my spare frame is orange and def 78 GS(or 77) but the mc5 is silver ---also the arms between the two are different but both are chromoly steel.
I'll try and get some pics
-
Hi,
I'm after some rust free fork tubes for a YZ80D. Any chance?
Cheers, Chris
Yes there is a very good chance of that I have a D frame tank and forks Ill check them on Friday.
-
CR side covers I'm a simple guy and old motorcycle parts should use standard currencies these bad boys have be worth a slab per side seeing how it's Xmas and my Fav beer is on special Stella Artois for $40.00 who dosent need a set of Race side covers?
(http://img682.imageshack.us/img682/3452/dscn3009.jpg)
(http://img704.imageshack.us/img704/8863/dscn3010.jpg)
(http://img704.imageshack.us/img704/8863/dscn3010.jpg)
-
The guy who wanted the YZ80D forks? Standard price there dirty but fine
(http://img163.imageshack.us/img163/5954/dscn3006m.jpg)
-
This is the sad side of my YZ 80 stuff the good bits are out at Daryl Lewis (of LBS pipes) Place and I he was out riding and not at home so no Pics sorry.
(http://img704.imageshack.us/img704/3239/dscn3005.jpg)
(http://img403.imageshack.us/img403/8866/dscn3008.jpg)
(http://img403.imageshack.us/img403/8792/dscn3007k.jpg)
I did find a good front guard after I took the pics,
YZ tank I didnt find sorry I have no idea where it went?
-
The guy who wanted the YZ80D forks? Standard price there dirty but fine
They look good. Whats a standard price?
PM sent.
Chris
-
Standard price is one slab