OzVMX Forum

Marketplace => Wanted => Topic started by: Dave D on December 02, 2009, 06:12:34 pm

Title: workshop manual to suit YZ250S
Post by: Dave D on December 02, 2009, 06:12:34 pm

I am after a manual as stated, I'm up to the reassmbly of the gearbox etc as I got the engine in parts & desperately need a manual. There was one on ebay last week but I missed it due to not taking into account Qld does not have daylight savings and missed the auction end :-[
new or second hand does not bother me...............thanks in advance Dave D

Title: Re: workshop manual to suit YZ250S
Post by: Freakshow on December 02, 2009, 07:22:18 pm

What year and what prefix is the part no >

Title: Re: workshop manual to suit YZ250S
Post by: Dave D on December 02, 2009, 08:41:30 pm

Bike is a 1986 I believe,  eng no is 56a-006870 if that helps?

Title: Re: workshop manual to suit YZ250S
Post by: Freakshow on December 02, 2009, 11:12:11 pm

Dont have a spare manual, but have a spare Racing preparation and tuning manual version for 1987 and refers to the (T) if thats bikes the same.

But i dont think it has explodes, i can go through my YZ manuals if you Can you live with scans of the pages you need ?

Title: Re: workshop manual to suit YZ250S
Post by: Dave D on December 02, 2009, 11:31:09 pm

That would be an awesome start if you have the time ;)  thank you, as far as I know 86-88 were pretty much the same engine wise, would've loved to get a centre port 490 motor to slot in but $$ don't agree with that theory at the moment.... :)

Title: Re: workshop manual to suit YZ250S
Post by: Dave D on December 09, 2009, 06:17:43 pm

Any luck on some scans yet?    thanks for looking  ;)

Title: Re: workshop manual to suit YZ250S
Post by: Freakshow on December 09, 2009, 07:05:50 pm

your on my list.

Title: Re: workshop manual to suit YZ250S
Post by: Dave D on December 28, 2009, 05:03:59 pm

Anyone out there able to help yet?????

I'm trying to get one off ebay but would really appreciate any scans of engine assembly asap  :)

So far the bike has been disassembled, frame has been modified to take a ktm whitepower shock and later model plastics (2002 cr gaurds, 2002 yz tank etc) then powdercoated blue, front end is back in and swingarm is just getting a bit of a hand polish before going back in. The motor is ready for assembly but I need to check diagrams before assembling gearbox & power valve system..

Any help much appreciated
Dave

Title: Re: workshop manual to suit YZ250S
Post by: Hoony on December 28, 2009, 07:29:49 pm

Dave D, where are you located?

a few years back a long time Yamaha dealer unloaded a shit load of OEM manuals to a bike shop i know in FTG Victoria "clive carters". they have probably all dried up by now but they were selling them for around $20 if i remember Right. like i say this was probably 3 + years ago now.

Title: Re: workshop manual to suit YZ250S
Post by: Dave D on December 28, 2009, 07:37:54 pm

I'm in Gladstone Qld, I'll try to look up the place you mentioned. I actually sold an old rigid chopper to a guy in FTG a few years ago. small world....

Title: Re: workshop manual to suit YZ250S
Post by: Hoony on December 28, 2009, 09:58:15 pm

Here ya Go Dave D

Clive Carter Motorcycles1033 Burwood Hwy, Ferntree Gully, VIC 3156

p: (03) 9758 1481


 I used to live In Gladstone as a kid, in "off street". very fond memories.

Title: Re: workshop manual to suit YZ250S
Post by: Dave D on December 28, 2009, 10:14:27 pm

Thanks mate  ;D  will give them a try

Title: Re: workshop manual to suit YZ250S
Post by: monaro308 on December 28, 2009, 10:20:05 pm

Dave try this....its not a manual but a parts break up.
I've had a look around but most online manuals go back to about 94.
Hope it helps but i'll keep searching as well.
cheers...Mario

http://www.yamaha-motor.com/sport/parts/home.aspx

Title: Re: workshop manual to suit YZ250S
Post by: Dave D on December 28, 2009, 10:36:57 pm

That is a big help  :)  thanks very much  ;D ;D

Title: Re: workshop manual to suit YZ250S
Post by: Dave D on January 10, 2010, 03:37:17 pm

Well I'm on the way using those images from the site but am now missing one washer/ thrust plate that goes on the clutch shaft before you can put the basket on. There are 2 the same but I only have one.
From what I can gather the part no is 2k7-16154-00-00
Would the local yamah shop be able to get me one ?