OzVMX Forum

Marque Remarks => CZ => Topic started by: tony27 on November 20, 2009, 07:57:25 pm

Title: Valve plate in forks
Post by: tony27 on November 20, 2009, 07:57:25 pm

When I stripped the forks in my 73 380 to fit the new damper rods & top out springs I found 1 fork had the shim facing down/away from the spring & the other with the shim upwards, on this 1 the shim had come adrift but was still able to be refitted to the valve. Am I correct in thinking the shim should be facing away from the spring? I haven't managed to find anything to show the set up in detail

Title: Re: Valve plate in forks
Post by: Ji Gantor on November 27, 2009, 09:44:15 am

Hi Tony,
Please post an image of the shim.
Please post an image of the dampner rod.


Ji

Title: Re: Valve plate in forks
Post by: tony27 on November 29, 2009, 02:25:34 pm

The parts are 967-41-135 & 967-41-136 according to the parts book & fit right at the bottom of the fork leg. Will take a photo on the phone to post when I get time, have some work to do to my trials bike for this weekends camping/riding trip first

Title: Re: Valve plate in forks
Post by: tony27 on November 30, 2009, 07:27:29 pm

url]][/url]<img src="http://i788.photobucket.com/albums/yy166/tony27_photo/Image099.jpg">[<img src="http://i788.photobucket.com/albums/yy166/tony27_photo/Image098.jpg">url][/url]
Top image shows the valve in centre of the photo
Lower image is the new rod from CRHighperformance at the top with the original at the bottom