OzVMX Forum
Clubroom => Tech Talk => Topic started by: RM Ted on November 15, 2009, 07:03:35 pm
-
Any one know where you can buy a clutch basket holder ????
-
Do you mean the primary drive the basket bolts to?
-
Its all good, got the old Suzuki manual out. Just weld a piece of pipe to and old steel plate and bingo clutch basket holder.
-
waste of time
just take pressure plate off leave
all clutch plates in
hold downward pressure on plates with hand and undo or do up
centre bolt with impact gun
been doing it for years ;)
-
Grab an old steel plate and an old fibre plate bolt them together and done!!
cheers
#87
-
Be extremely cautious with clutch basket holders they can break the clutch basket. The good old rattle gun is the answer.
-
I bought and used one of these several times and it works well...
http://cgi.ebay.com.au/SUZUKI-TS100-TS125-TS185-TS250-CLUTCH-HOLDING-TOOL_W0QQitemZ120448502323QQcmdZViewItemQQptZUK_Motorcycle_Parts?hash=item1c0b4a4a33