Messages

1

Competition / Re: 2020 Classic Nats

« on: December 27, 2019, 11:20:34 AM »

Hi,   Bugger, my 1977 Honda CR125 is F****d then , a massive 7 inch travel Front and rear aint going to be any good in that class , or, do I stick 1977 Husqvarna forks and swing arm in it . maybe they should just call it the  "1977" class .

2

CZ / Re: falta 250 timing

« on: December 13, 2019, 10:15:04 AM »

Hi, I fitted a new Vape (external rotor) to my 360 sidepipe , timed as per CZ specs , and also did the "Fuk Fuk Fuk" dance around the workshop, eight weeks later,reset the ignition , retarded the timing  0.4mm, now at 3.0mmBTDC, and now its great  . cheers

3

CZ / Re: Twinport Instruction manual

« on: October 11, 2019, 05:16:47 PM »

Gumtree , CZ

4

CZ / Twinport Instruction manual

« on: October 08, 2019, 10:25:07 AM »

Hi, there is a handbook for sale ,in WA, with an "Engine performance" report for a 250 twinport , engine number 201271 ,help reunite this to the owner .
cheers 

5

CZ / Re: falta parts

« on: June 28, 2019, 09:30:32 AM »

Hi,  I put the light ignition flywheel ,  Vape,  on my 360 SP, but spins up too quick ;too much wheelspin , so I had to get the std weight Vape  flywheel , as well , Its much easier to ride , for an  old fella .
 

6

CZ / Re: cz kill switch

« on: February 01, 2019, 06:59:06 PM »

Hi, , 15 is the earth wire , 1 is the (Power) wire to the points , 
cheers

7

Yamaha / Re: Can a DT1MX race in Pre 70 classic motocross?

« on: November 02, 2018, 11:27:29 AM »

Yes its a pity there is no Official MA site/contact  to get a definitive resolution over eligibility concerns .

8

Yamaha / Re: Can a DT1MX race in Pre 70 classic motocross?

« on: November 01, 2018, 08:28:50 PM »

yep you are right the DT1MX is  a different model, therefore not a flow on, can you put a GYT kit on a 1969/70
 DT1?

9

Yamaha / Re: Can a DT1MX race in Pre 70 classic motocross?

« on: November 01, 2018, 07:29:37 PM »

 Yamaha DT1 pre 70 , DT1MX was a new model and like a DT2mX .is pre 75, not a flow on , and not pre 70,

10

Wanted / Re: CR125M2/3/4 Air box

« on: October 28, 2018, 09:38:27 PM »

Hi, If its for sale, text me the details.
thanks

11

Wanted / CR125M2/3/4 Air box

« on: October 28, 2018, 11:08:04 AM »

Hi , Anyone have a 76.77.78 Honda CR125 air filter/air box they don't need
 thanks
Michael 0418729425.

12

Wanted / Re: 1974 cr125honda

« on: August 09, 2018, 09:15:19 AM »

Hi,  Hotrods  part number 8162, fits  Honda CR125  81 to 84 ,Suzuki RM125  84 to 86 ,any good Engineer can fit it , machine the crankshaft pin hole to suit larger crank pin .
cheers

13

Wanted / Re: CZ Sidepipe wanted

« on: December 30, 2017, 10:35:54 AM »

Hi,
https://www.gumtree.com.au/s-ad/maroochydore/motorcycles/cz250-side-pipe-1969-runs-very-well-vmx/1168676660

14

Tech Talk / Re: How much oil in 77 cr125 forks?

« on: September 22, 2017, 05:54:50 PM »

Hi,
refill after draining  165cc,  after reassembly (dry) 180cc
cheers.

15

Wanted / Honda Cr125 74/77 rear wheel

« on: February 26, 2017, 09:06:05 PM »

Hi , Wanted usable rear wheel to use for  dirt track tyred spare, Cr125 74 to 77 , mr175 ? the same ? , is an Mt125 the same cept steel rim ? ,
thanks .