61
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
62
For Sale / HEADS-UP $30 Welding Tables at SUPER CHEAP
« on: October 07, 2013, 02:54:51 AM »
I finally got around to assembling this last night.
They were on CLEARANCE SALE at Super Cheap, a few weeks ago for $39.95
Then three weeks ago reduced to $35
Then last week reduced to #$30
The idea is you can bolt or clamp your job to it.
Then tilt it 90deg from a horizontal position to a vertical position, or 180deg back
the other way, or anywhere in between. You can walk all around your job for easy access to it.
Getting optimum angle to run your weld at really helps improve your welding outcome.
Well,,,,,,,,,,,,it does mine
Good for bolting engines and components to as well, for assembly, porting etc, etc.
Looked at a couple of others, very similar but they were around the $230--$250 mark.
For 30 bucks, I am very happy.
Would pay to ring around first to check for availability though.
I have five store outlets ranging in 10 minutes to 3/4 hour drive, Still a few left around Newy.
There is also a few angle bits etc, that fit onto the table for square jigging etc.
They were on CLEARANCE SALE at Super Cheap, a few weeks ago for $39.95
Then three weeks ago reduced to $35
Then last week reduced to #$30
The idea is you can bolt or clamp your job to it.
Then tilt it 90deg from a horizontal position to a vertical position, or 180deg back
the other way, or anywhere in between. You can walk all around your job for easy access to it.
Getting optimum angle to run your weld at really helps improve your welding outcome.
Well,,,,,,,,,,,,it does mine
Good for bolting engines and components to as well, for assembly, porting etc, etc.
Looked at a couple of others, very similar but they were around the $230--$250 mark.
For 30 bucks, I am very happy.
Would pay to ring around first to check for availability though.
I have five store outlets ranging in 10 minutes to 3/4 hour drive, Still a few left around Newy.
There is also a few angle bits etc, that fit onto the table for square jigging etc.
63
Bike Transport / Melbourne to Conowindra VMX races on 19th & 20th OCT
« on: October 04, 2013, 06:39:17 PM »
I am wondering if any Victorians were considering attending the NSW Premier Showground weekend event at Conowindra
on the 19/20th in two weeks time?
I am trying to get this bike, a box of bits and a wheel from Rowville VIC or there abouts to Conowindra NSW? Cash, say $100?
Perfect place to take your Darlin for a weekend get away, and say that balloon ride you have been promising her
on the 19/20th in two weeks time?
I am trying to get this bike, a box of bits and a wheel from Rowville VIC or there abouts to Conowindra NSW? Cash, say $100?
Perfect place to take your Darlin for a weekend get away, and say that balloon ride you have been promising her
64
Kawasaki / Kawasaki KS/KE125 Pre75 ELSINORE MUNCHER
« on: September 16, 2013, 07:17:36 PM »
I just bought one of these, but don't know the age of it?
It is the first early style of rotary induction engine.
It is the first early style of rotary induction engine.
65
Wanted / WANTED to buy MAICO 83 or 84 frame.
« on: September 07, 2013, 06:55:16 PM »
It doesn't matter if it is MC or GS,,,,air cooled or water cooled,,,,with swinging arm or without.
Thanks.
Thanks.
66
General Discussion / Bike Stands CHEAP
« on: September 07, 2013, 01:56:33 PM »
ALDI PRICE REDUCTION
67
General Discussion / So am I going nuts, or where is the 84 honda paint thread???
« on: August 22, 2013, 09:38:23 PM »
I saw a thread on here wanting info about Honda 84 series paint codes???
This is what I did for my 84, all the same whether CR or XR
But have spent 20 minutes trying to find the thread, without Joy
WTF
This is what I did for my 84, all the same whether CR or XR
But have spent 20 minutes trying to find the thread, without Joy
WTF
68
General Discussion / Happy Mothers Day!
« on: May 12, 2013, 07:26:23 PM »
Sometimes I wonder about this privilege,
I know my dear old Ma has always played a big part
My essence pushed billions out of the way
It was me who rode the winning sperm!
I walked, I fell on my knee
Then I ran and fell on my knee again
I turned me older sissy's roller skates into a skate board
she nearly killed me,
but my mum didn't
And then that shinny gold pushy, how good was that
even better with the heart of dads new Victa in it! He nearly killed me too
but me mum didn't
And then I had proper Motorbikes,,,so like they do, the cops had to come
"you didn't tell 'em I here did ya? did ya Ma? Out the back window I went
I had to come back home but, them bloody motorbikes
Ooh me Knee! Ooh me Knee Ma!! Ooh me knee, She was still there
Ma was always there
She still is
Heaps of people are important to me
its hard knowing who they are sometimes
why didn't you get a motorbike?
but they are still important
I know my dear old Ma has always played a big part
My essence pushed billions out of the way
It was me who rode the winning sperm!
I walked, I fell on my knee
Then I ran and fell on my knee again
I turned me older sissy's roller skates into a skate board
she nearly killed me,
but my mum didn't
And then that shinny gold pushy, how good was that
even better with the heart of dads new Victa in it! He nearly killed me too
but me mum didn't
And then I had proper Motorbikes,,,so like they do, the cops had to come
"you didn't tell 'em I here did ya? did ya Ma? Out the back window I went
I had to come back home but, them bloody motorbikes
Ooh me Knee! Ooh me Knee Ma!! Ooh me knee, She was still there
Ma was always there
She still is
Heaps of people are important to me
its hard knowing who they are sometimes
why didn't you get a motorbike?
but they are still important
71
Maico / MAICO Pre-60 Alloy Oval Barrel Blizzard Project.
« on: February 27, 2013, 07:43:17 AM »
I guess I am a bit excited after looking at the bikes thrown up in 090's pre 60 hunt.
I am only collecting bits at this stage.
So far I have just purchased a frame with Paul's help
I have a 57 250 bottom end and this 250 Iron Barrel top end is on the way
And this tank, when it arrives of course
Although unlikely, if anyone has any other bits for a Maico blizzard project and wishes to sell, please PM me.
I am only collecting bits at this stage.
So far I have just purchased a frame with Paul's help
I have a 57 250 bottom end and this 250 Iron Barrel top end is on the way
And this tank, when it arrives of course
Although unlikely, if anyone has any other bits for a Maico blizzard project and wishes to sell, please PM me.
72
General Discussion / EU postage address
« on: February 19, 2013, 12:20:57 AM »
Hello members,
I have won ant item on German Ebay, but the seller will only post to other EU countries
I need an Address in one of the EU countries, to then on post it to me.
Does anyone no of such a service please?
I have won ant item on German Ebay, but the seller will only post to other EU countries
I need an Address in one of the EU countries, to then on post it to me.
Does anyone no of such a service please?
73
Competition / 2012 FINKE ASSAULT Screening at 10.58am TODAY ON Channel 10 ONE
« on: November 30, 2012, 09:01:56 AM »
TIME TO GET READY
74
Competition / Isle Of Man TT
« on: November 30, 2012, 08:39:04 AM »
Heads up for anyone interested,
Free to air channel ten ONE is broadcasting three hours of this prestigious race at the moment. The programming still has an two and a half to run.
If you like competition Motorcycles,,,,,,,,,,,,,,,,,,,well this is some of the best video footage and coverage your peepers will ever lay eyes on.
4 laps equaling 150 miles of machines with their necks being wrung
and only 0ne second between first and second place in the 600cc class
Free to air channel ten ONE is broadcasting three hours of this prestigious race at the moment. The programming still has an two and a half to run.
If you like competition Motorcycles,,,,,,,,,,,,,,,,,,,well this is some of the best video footage and coverage your peepers will ever lay eyes on.
4 laps equaling 150 miles of machines with their necks being wrung
and only 0ne second between first and second place in the 600cc class
