Author Topic: Suzuki 400C floating brake help  (Read 700 times)

0 Members and 1 Guest are viewing this topic.

Offline Hotelmoto

  • C-Grade
  • **
  • Posts: 52
    • View Profile
Suzuki 400C floating brake help
« on: January 21, 2009, 04:32:57 PM »
Replacing rear wheel bearings in my 78 RM400C thats all ok but have found 2 same size bearings in the floating brake plate, here's the prob... the parts diagram only show one and the spacer is reverse to the way it came out. If i follow the diagram then the outer centre of the hub and backing plate rub together.

anyone with same bike able to help? or know what i am talking about.


Doc

  • Guest
Re: Suzuki 400C floating brake help
« Reply #1 on: January 21, 2009, 09:13:51 PM »
yup and yup Hotelmoto, the diagram does show the sleeve around the wrong way ;)

below is the picture of the correct assembly order with bearing already fitted in hub. The hub bearing is the odd one out and it's a 6005 sealed both sides.


just noticed, in my pic I have the axle adjuster arse about but just ignore that ::)
 
« Last Edit: January 21, 2009, 09:20:03 PM by Doc »

Offline Hotelmoto

  • C-Grade
  • **
  • Posts: 52
    • View Profile
Re: Suzuki 400C floating brake help
« Reply #2 on: January 21, 2009, 09:20:25 PM »
Thanks Doc